FRETS.NET

Richard Smith's Discussions (16)

Discussions Replied To (12) Replies Latest Activity

"Good ideas, thanks!"

Richard Smith replied Aug 1, 2010 to Wiring management for guitar electronics question

3 Aug 1, 2010
Reply by Richard Smith

"Walnut has a specific gravity (density) between 4 and 5 compared to Ebony at .9 and…"

Richard Smith replied Sep 10, 2008 to Eastern walnut as a fingerboard material?

5 Jun 1, 2009
Reply by Russell Vance

"Many luthiers glue up necks, often with a laminate of a different species of wood. I…"

Richard Smith replied Sep 7, 2008 to Making a new neck.

41 Sep 29, 2008
Reply by Donald A. Fortune

"Yes you must be sure that your linings are wide enough. Usually the purfling is narr…"

Richard Smith replied Aug 28, 2008 to A Further Beginners Question About Bindings

3 Aug 28, 2008
Reply by Richard Smith

"Google Omega. They have heating blankets of all kinds of sizes and wattage."

Richard Smith replied Aug 28, 2008 to Heating blankets

7 Sep 9, 2008
Reply by Charlie Hoffman

"Jeffrey - I think that book is no longer in print. Magnus thanks for the link - very…"

Richard Smith replied Aug 19, 2008 to Source for dovetail routing jigs?

4 Aug 19, 2008
Reply by Jeffrey L. Suits

"Steve, I used 1/4 " OD cf rods like the ones you buy for kites. The necks are about…"

Richard Smith replied Aug 15, 2008 to Graphite neck reinforcement

8 Aug 17, 2008
Reply by Donald A. Fortune

"Steve, I just wonder if we are overbuilding. I've actually put graphite in uke necks…"

Richard Smith replied Aug 15, 2008 to Graphite neck reinforcement

8 Aug 17, 2008
Reply by Donald A. Fortune

"Why bother with graphite? Do Martin and Taylor use it?"

Richard Smith replied Aug 14, 2008 to Graphite neck reinforcement

8 Aug 17, 2008
Reply by Donald A. Fortune

"Just got my 000 plans 14 fret to body from LMI."

Richard Smith replied Aug 13, 2008 to 000/0M plans, anyone know if they exist?

8 Aug 13, 2008
Reply by Bruce Herrmann

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service