FRETS.NET

Ry Charters's Discussions (50)

Discussions Replied To (43) Replies Latest Activity

"Hey Dave, I've used the schallers before to replace a floyd rose bridge. I did have…"

Ry Charters replied Jul 5, 2010 to Schaller FR retrofit

3 Jul 6, 2010
Reply by Russell Vance

"I did this repair on a '51 Epiphone archtop around a month ago. On top of a granite…"

Ry Charters replied Apr 18, 2010 to Flattening an old pickguard?

4 Apr 18, 2010
Reply by Ry Charters

"Well, I sprayed thin coats (with thinner, no retarder) around an hour and a half apa…"

Ry Charters replied Mar 25, 2010 to Soft lacquer?

6 Mar 25, 2010
Reply by Ned Knepp

"Most bottleneck guys want a radiused board to articulate individual notes better. Sq…"

Ry Charters replied Mar 23, 2010 to Slide guitar

4 Mar 23, 2010
Reply by Tim Mace

"You can always glue ebony "binding" to the sides of the FB to widen it. Its pretty i…"

Ry Charters replied Jan 22, 2010 to Questions from a newbie

22 Jan 29, 2010
Reply by Grahame Myers

"Thanks guys. I like the shellac idea. I tried some premixed bullseye brand before on…"

Ry Charters replied Jan 22, 2010 to my finish is too nice, help

3 Jan 22, 2010
Reply by Ry Charters

"I don't know... there was plenty of chrome near this one and it looked fine. I guess…"

Ry Charters replied Jan 14, 2010 to old celluloid PG heat bend

9 Jan 17, 2010
Reply by Rob Mercure

"Thanks Russ, that good to know. It was a little greasy and very bubbled, but I clean…"

Ry Charters replied Jan 14, 2010 to old celluloid PG heat bend

9 Jan 17, 2010
Reply by Rob Mercure

"Also, its about 1/8" thick."

Ry Charters replied Jan 13, 2010 to old celluloid PG heat bend

9 Jan 17, 2010
Reply by Rob Mercure

"Actually, its three hours later, and I still have it clamped up as it is still a lit…"

Ry Charters replied Jan 13, 2010 to old celluloid PG heat bend

9 Jan 17, 2010
Reply by Rob Mercure

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service