FRETS.NET

William F.Eden's Discussions (620)

Discussions Replied To (601) Replies Latest Activity

"Good luck Paul we will sure miss you on the site.Bill."""""""""""

William F.Eden replied May 20, 2009 to guitar building tools must take all

7 May 23, 2009
Reply by Jerry Mercer

"A-men Nick."

William F.Eden replied May 18, 2009 to Binding F Holes

7 Jul 28, 2009
Reply by Steve Baker

"Ed it is not that hard to fix the cracks in the finish any ways. But if you think yo…"

William F.Eden replied May 17, 2009 to Nitro finish cracking

6 May 17, 2009
Reply by Russell Vance

"Take the bridge off and sand the finish off that way you will not have to refinsh th…"

William F.Eden replied May 15, 2009 to laquer finish removal

2 May 15, 2009
Reply by vince sauter

"In my oppion the bridge plate in the picture has the pin holes to close to the back…"

William F.Eden replied May 14, 2009 to Bridge Plate Replacement Questions

11 May 17, 2009
Reply by Nick Anthony

"I would reacamend you use a piece of good 1/8 hard Maple Bill.""""""""""

William F.Eden replied May 12, 2009 to Bridge Plate Replacement Questions

11 May 17, 2009
Reply by Nick Anthony

"I do much the same as the rest of the boys as far as getting them off but to keep th…"

William F.Eden replied May 11, 2009 to BRIDGE REMOVAL AND RE GLUE

8 May 13, 2009
Reply by FRANK

"I would just put a plug in it and put a screw on one in there with a piece of lether…"

William F.Eden replied May 9, 2009 to Tapered Endpins vs. Strap Buttons

4 May 13, 2009
Reply by Rick Homan

"Well Bob you are not likely to far out I got the guitar from an old farmer.I just we…"

William F.Eden replied May 8, 2009 to Looking for info. Dose any one know any thing about a R.S Williams and sons Co.Ltd Guitars?????

3 May 8, 2009
Reply by Bob Webster

"Thanks for the help Greg and Nick . But you see I am like the rest of you repair men…"

William F.Eden replied May 5, 2009 to Split in finish after refinishing from an old repair

6 May 6, 2009
Reply by Mike Kolb

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service