FRETS.NET

Roger Häggström's Discussions (571)

Discussions Replied To (525) Replies Latest Activity

"No luck with the nut then. I was thinking that the downforce from the strings could…"

Roger Häggström replied Jan 16, 2017 to 1997 V-Series Strat - Bridge Splays Strings Too Widely?

24 May 4, 2017
Reply by Walter W Wright

"Thanks. When doing a compound fretboard my guess is that not every fret will follow…"

Roger Häggström replied Jan 16, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"A combination of tighter spacing in the nut (with the E/e strings about 3,5 mm from…"

Roger Häggström replied Jan 16, 2017 to 1997 V-Series Strat - Bridge Splays Strings Too Widely?

24 May 4, 2017
Reply by Walter W Wright

"Thanks!My intention for this was to make better seated frets, not that old "here is…"

Roger Häggström replied Jan 16, 2017 to Better Jaws2

35 May 3, 2023
Reply by Michael Tulloch

"Thanks. Doing a new nut and saddle today I had some use of the table filing the nut…"

Roger Häggström replied Jan 15, 2017 to Nut action

12 Jan 22, 2017
Reply by Hesh Breakstone

"The beam I use helped me get a really small and even relief along the fretboard. The…"

Roger Häggström replied Jan 14, 2017 to Relly low action

5 Jan 14, 2017
Reply by steven gallagher

"Thanks a lot. It seems that I got most of the parameters right then. I need to flatt…"

Roger Häggström replied Jan 13, 2017 to Relly low action

5 Jan 14, 2017
Reply by steven gallagher

"OK. Maybe 12 hours is a bit much, maybe 6 hours is a better option. Been using all t…"

Roger Häggström replied Jan 12, 2017 to Used the hydrochloric acid trick

13 Jan 14, 2017
Reply by Ed Minch

"...and with the solid unslotted string pins the new bridge plate will hold much bett…"

Roger Häggström replied Jan 11, 2017 to bridge pin drilling quickie

8 Jan 11, 2017
Reply by Christopher Parker

"Hydrochloric acid and Muriatic acid is the same stuff. So, they melted away for you?…"

Roger Häggström replied Jan 8, 2017 to Used the hydrochloric acid trick

13 Jan 14, 2017
Reply by Ed Minch

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service