Tom Krebs's Discussions (256)

Discussions Replied To (225) Replies Latest Activity

"If the pot itself is broken? Pull the pickguard, make notes on the connections, and…"

Tom Krebs replied Oct 26, 2010 to Fixing loose volume knob

17 Oct 30, 2010
Reply by Rob Mercure

"Slide a rag under the knob and wrap it around the shaft for a good hold to wiggle an…"

Tom Krebs replied Oct 25, 2010 to Fixing loose volume knob

17 Oct 30, 2010
Reply by Rob Mercure

"What type of nut? Those gripper wrenches at stew mac are only about $10. I bought on…"

Tom Krebs replied Oct 9, 2010 to What to do about a stripped truss rod nut?

2 Oct 13, 2010
Reply by Gregory Hites

"Betty Crocker is going to be bummed out. Check out this 109 year old bulb! http://w…"

Tom Krebs replied Oct 3, 2010 to Soon no more incandescent bulbs

14 Oct 5, 2010
Reply by Pierre-Antoine Roiron

"I have mounted pedal effects inside guitars. It's a case by case situation. The main…"

Tom Krebs replied Oct 1, 2010 to A tremolo pedal installed into a guitar body

10 Oct 12, 2010
Reply by Mac Walker

"Paul, Thanks a ton. That is perfect!"

Tom Krebs replied Sep 25, 2010 to Tying Knots for Gamba Frets?

3 Sep 26, 2010
Reply by alan suita

"Paul, if you are hiring a luthier for this job. He/she should be able to make the pl…"

Tom Krebs replied Sep 24, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"These are a pain sometimes. Check to make sure that the fingerboard is not separatin…"

Tom Krebs replied Sep 21, 2010 to Rickenbacker Bass problem

14 Oct 9, 2010
Reply by Grahame Myers

"See this thread:"

Tom Krebs replied Sep 20, 2010 to Dead note

4 Sep 20, 2010
Reply by Greg Mirken

"Sorry about that poor post. The cavity measurement should read: 2 X 3-3/16 X 5/8 inc…"

Tom Krebs replied Sep 11, 2010 to Travis Bean Pickup - replacement?

2 Sep 12, 2010
Reply by Mac Walker


© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service