FRETS.NET

Greetings! There is a nice block of African Mahogany for sale here locally and I and was wondering if it would be good for building a solid body, and a neck? (Planing on building a PRS style guitar this year) It's 14 x 30 x 2, cut somewhat on the fletch where a portion of it is quarter sawn then transitioning to flat sawn. Would Honduras Mahogany be a better option? Opinions welcomed! Thanks, littleguitargreg

Views: 222

Reply to This

Replies to This Discussion

African Mahogany has very open grain and dramatic differences in density between the hard and soft grain, as compared with Honduran/Genuine Mahogany, and my experience has been that it is less stable because of that. That being said I still judge wood "by the piece" so if I see a piece that is consistent in density and has a "musical" ring when tapped I have been known to use it. 

Honduras would shure be a lot lighter. That is one thing I don't like about the African  Mahogany It is strong but heavy.Bill...........

Good point Bill. I've got a Les Paul made in 2005 and it is HEAVY!!

 I have built the od  neck out of A.Mahogany and we had troble getting the Trust rod  to work right.Bill...........

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service