Glued in saddle? No Problem!
I was surprised several years ago when I thought of this, AND that is works amazingly well! The photos following are one of the worse case scenarios . There is only a tiny bit of saddle left with this glued in nightmare. I just head up the long flat tip of this set of Vicegrips with a torch for a few seconds, and about a min latter, with some wiggling back and forth, the saddle just pops right out. I have used this several times on Martin style glued in bridges too. More often than not, the saddle comes out relatively intact too.
Views: 230
Replies to This Discussion
-
Permalink Reply by Kerry Krishna on
-
-
-
-
Permalink Reply by William F.Eden on
-
Thats a very good idea KERRY.
-
Permalink Reply by Paul Verticchio on
-
Great idea, Kerry!
-
-
Thanks guys! But I'll tell ya, I am looking for some 'Frank Love' of this idea...
© 2025 Created by Frank Ford.
Powered by
