Any thoughts on this? I've repaired a break like this before without any reinforcement, but it was a repair on a nylon string guitar. I called my customer to check it's still glued. It is!
But recently, i've been reading some posts about end grain gluing and how weak this joints are. So, now i have some doubts.
This guitar i'm supposed to glue is a steel string (a cheap one).
David Collins has an excellent jig for repairing neck breaks and a great video showing how it works. https://www.youtube.com/watch?v=D6lzTM__Yrs
There was a thread here a while back discussing it: http://fretsnet.ning.com/forum/topics/headstock-repair-jig-that-i-w... Something like this could be used to allign both sides of the break in prep for cutting/fitting whatever you use to join them.
Thank you mark, i remember seeing that jig before. A great high tech jig. I think is time to try and build one. Do you know if there is a plan for building it or something like that?
One more thing, Mario....
The ability to execute a stable repair without splines & a backstrap are further compounded by the ultra low quality wood used in guitars in this price range. I offer this only as a consideration.
Otherwise, I'm in the camp of those who say it's a gonner. As someone else said, your reputation will suffer if the wood itself isn't "up to the task".
David Collins can be contacted at Ann Arbor Guitars http://www.aaguitars.com/ in Michigan. He designed and built the jig. He's you best bet for the info you request. He's a true "device"
Best of luck in the resolution of your project :)
should read: "device WIZARD!"
I'm definetly gonna give a try on that gig. Thanks for the infor Paul. Best!
No, but you may want to contact David. The use of a mini satellite dish bracket discussed in the thread is a great idea.
Thank you Folks, all of your replies are really appreciated. I'll give it a thought, talk to my customer and let you know how it ends. Cheers!
If the box is valuable just make a new neck !
I've used a variation on an old school way of doing this repair. The old school way is too glue it together, scoop out across the crack, the end of your belt sander will work. Then you fit a new piece across the crack. It adds a lot of strength and it's easy to feather it in and finish over. I've done it this way and it works my variation is to glue in veneer until you fill it and then trim it and finish it. I have a few pictures of it in the works but not complete.
That's nice John i think the veneer is to avoid shaping and fitting a new piece of wood. Or does doing it that way adds more strength to the repair?
Why I'm not keen on splines
This just came in, the owner purchased it like this.
Previous repaired break, all solid but the end of the spline weakened the area which has broken
Going to need a backstrap
I guess that spline is not well fitted to the bottom of the channel. That's why it lifted. That's the difficult part, getting splines fitted to the bottom. Good luck with that one, i'd like to see some pics when is finished.