Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Inspection camera for Apple productsI have found these great inexpensive inspection cameras online through amazon. They are anywhere from $15 to $35. I would just order them a… Started by Luke Single in Luthier Talk |
3 |
Aug 19, 2015 Reply by Ned Knepp |
Discussion about CA gluing frets is goneNew guy here. I was reading an older discussion last Wednesday about using CA glue when fretting, but now it's gone. I copied the post quot… Started by Michael S. Fields in Luthier Talk |
5 |
Aug 18, 2015 Reply by Michael S. Fields |
Difficulty with drop fillsI recently tried the drop fill technique on a couple finish scratches on my guitar, after the superglue was applied and had dried there was… Started by david ericson in Luthier Talk |
6 |
Aug 17, 2015 Reply by david ericson |
Frank Gay biography"Prairie Bohemian: Frank Gay's Life in Music" is a new book, hot off the press with many old photographs. Check it out! http://www.uap.ual… Started by UAPress in Luthier Talk |
6 |
Aug 17, 2015 Reply by UAPress |
Flat Radius = Flat Saddle? Classical SetupHey everyone, EDIT: I started this thread asking about nuts for classical guitars but I now need some more general setup advice. I'm sett… Started by Pete Andreev in Luthier Talk |
3 |
Aug 16, 2015 Reply by Greg Mirken |
Crack at Neck and Headstock join repair strengthHi, I was hoping someone may give me some advice. I am considering buying a used Larrivee acoustic guitar. It has had a crack repaired… Started by Paul Said in Luthier Talk |
5 |
Aug 15, 2015 Reply by Howard Klepper |
Makings Bends Possible: Flatten Fret Radius??I have a '62 Road Worn Strat that I really love. I'm setting it up after having it on a stand for a few months and I'm having an issue. The… Started by Pete Andreev in Luthier Talk |
13 |
Aug 14, 2015 Reply by Hesh Breakstone |
Ibanez tech repI've got a 2002 Ibanez SR type 5 string bass in for electrics replacement. The controls were fried( someone let the smoke out) the owner br… Started by Peter Laine in Luthier Talk |
1 |
Aug 12, 2015 Reply by Demetry Merkuloff |
KTM-9 discontinued... now what?I have been using KTM-9 waterbased lacquer on my guitars with good success, but I see now that due to a fire at the factory it is no longer… Started by Doug Collins in Luthier Talk |
1 |
Aug 11, 2015 Reply by Mark Fogleman |
Epiphone FT147 Neck resetI have a 1972 Epiphone FT147, dreadnought flat-top, MIJ (probably by FujiGen) which needs a neck reset. Couldn’t find anything on the net t… Started by Ian Barker in Luthier Talk |
12 |
Aug 11, 2015 Reply by Ian Barker |
© 2026 Created by Frank Ford.
Powered by
