Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
Unusual String WinderCan anybody help identify this tuner? It has an 1890 - 1900 look about it. Bone knob held on by the washer and peened over stem. When the… Started by George Roberts in Luthier Talk |
6 |
Jan 30, 2013 Reply by George Roberts |
Gibson C-1 Neck Joint/Angle??Hey everyone. I have a Gibson C-1 my dad gave me when I was a kid. It doesn't sound very good and I am most likely gonna sell it. (My dad b… Started by David Edward Helmer in Luthier Talk |
3 |
Jan 29, 2013 Reply by Jeff Highland |
Remember Maestronet?For those of us who were active online in the 1990s, you might remember Maestronet...it was the big bowed-string discussion forum. After i… Started by Adam Sweet in Luthier Talk |
0 | Jan 29, 2013 |
New shop space!! What to do?After 17 years running my business in a 288 sq. ft. closet, I'm moving to a proper shop space of 800 sq. ft. that I'm free to configure how… Started by Mark A. Kane in Luthier Talk |
12 |
Jan 28, 2013 Reply by Mark A. Kane |
Artec passive problemsI had an artec blend/tone set up going with a humbucker and piezo, both passively wired but of course the power going to the tone circuit. … Started by Doug T in Luthier Talk |
0 | Jan 28, 2013 |
Fix color drops - guitar finishHi to everybody: I'm spraying a JB sunburst (three colors). Everything is almost perfect. "Almost" because I have two little drops of blac… Started by Stefano in Luthier Talk |
3 |
Jan 28, 2013 Reply by Eric Steven Johansen |
Music Store Bosses...Hey all. I am a new member to frets.net. Glad to be here. I work at a music store that mainly buys off the street and then re-sells to the… Started by David Edward Helmer in Luthier Talk |
6 |
Jan 28, 2013 Reply by William F.Eden |
Maple fretboard's finish comming of, yelp!Hi all, I'm new here, learnung luthier stuff. Been working on the fret ends of this fender neck, they were sticking out on both sides in s… Started by Silverburst in Luthier Talk |
18 |
Jan 27, 2013 Reply by Silverburst |
Franks side bulge jigs questionGreetings ... a while back, after seeing the idea on Franks .com site, I made a number of similar aluminum jigs to push bulged sides back… Started by onewent in Luthier Talk |
11 |
Jan 27, 2013 Reply by Eric Steven Johansen |
Does antone knoe what this is?I hesitate to ask as I know this is not a very prestigious guitar, but I liked the look of it and I think its worth saving. What I’d love t… Started by Steve Bettesworth in Luthier Talk |
22 |
Jan 26, 2013 Reply by Robbie Collins |
© 2025 Created by Frank Ford.
Powered by
