Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Need technical advice: building electrical frame-saw (3 blades)Hello to you all!I’m in the process of making a “frame-saw”, a frame holding multiple saw-blades (3). I have managed to make a “hand oppera… Started by Bart van Weperen in Metalworking, Machining, Tool & Fixture Making for Luthiers |
10 |
Oct 18, 2011 Reply by Bart van Weperen |
Arch top guitar to pin bridge conversion......Has anyone here actually done this work? Out of the 14 Kay Kraft two points that I have right now, I have 2 that are both written off ca… Started by Kerry Krishna in Luthier Talk |
12 |
Oct 17, 2011 Reply by Ned Knepp |
Finishing question...Other than doing spot-repair & touch-ups on structural work, I'm really not experienced with complete instrument refinishing. As a per… Started by Mike Kolb in Luthier Talk |
7 |
Oct 17, 2011 Reply by William F.Eden |
Help with Failed Attempt to Repair Top CracksI had a guitar I built come back with a couple of top cracks that the owner said occurred when the bridge came loose, although looking at t… Started by Philip Secrist in Luthier Talk |
18 |
Oct 16, 2011 Reply by Ned Knepp |
Convert floating bridge to pin bridgeI have a 50's birch silvertone that i'd like to convert from a floating bridge to a pin bridge. The reason I want to convert it is because… Started by John McDonald in Luthier Talk |
12 |
Oct 16, 2011 Reply by Magnus Hultin |
Cocobolo??Hi my friends can anyone tell me were I can buy a nice set of Cocobolo. And is there any problems as far as glueing it up or finishing????… Started by William F.Eden in Luthier Talk |
7 |
Oct 14, 2011 Reply by FRANK |
Beveling edges on a Martin style Pick GuardI have had requests for a beveled edge red tortoise pick guard for a Martin that did not come with one. My problem is that in making the b… Started by Ed Taublieb in Luthier Talk |
14 |
Oct 14, 2011 Reply by Ed Taublieb |
Flattening old Bakelite pick guards and source for new guards?The old axes I am constantly working on have a few things in common, and the warped guars are one of them. Have any of you any ideas on how… Started by Kerry Krishna in Luthier Talk |
30 |
Oct 13, 2011 Reply by Kerry Krishna |
loar spaced F5 tuners?I am working on a Gilchrist F5 mandola & it needs new tuners. The 29/32 post spacing on the tuners I got from Stew Mac are too close t… Started by harrison phipps in Luthier Talk |
6 |
Oct 12, 2011 Reply by Paul Hostetter |
Truss rod pushed down into the guitar neckHello, I have a Oscar-schmidt (by washburn) OE30 SHB guitar with a stripped truss rod nut and the truss rod has somehow moved further into… Started by Henry Ramsey in Luthier Talk |
26 |
Oct 11, 2011 Reply by Michael P. Lemieux |
© 2026 Created by Frank Ford.
Powered by
