Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Laquer problem over previously masked areaWhat is it that stays behind after tape is removed ? When spraying nitro over areas that were masked with tape , I get an uneven surface ,… Started by Len Biglin in Luthier Talk |
8 |
Jul 18, 2011 Reply by Kerry Krishna |
Truss Rod Assembly on 12 String BardHello- I have an older 12 string Epiphone that I am restoring. Not an expensive acoustic but one that I remember had good sound from way… Started by Robert Gleeson in Luthier Talk |
2 |
Jul 16, 2011 Reply by Robert Gleeson |
Tool for bridge plate removalI have a Gibson LG-0 in for repair and I need to replace the bridge plate. I have a few tools to do this, but I would like to hear or see w… Started by Justin in Luthier Talk |
11 |
Jul 16, 2011 Reply by Magnus Hultin |
repair on a polyurethane finish?To all: I recently acquired an inexpensive - but pretty nice - Epiphone WildKat guitar. The guitar is mint save for 2 minor gouges in th… Started by Will Travnikar in Luthier Talk |
1 |
Jul 13, 2011 Reply by Thomas James |
Neck block repairI have a 1970s Epiphone flat top guitar that has been my main performance instrument for a couple of years - it has a great sweet sound… Started by Mikael Lewis in Luthier Talk |
4 |
Jul 13, 2011 Reply by Robert May |
How to deal with a dissatisfied customer you don't agree with?Well, it's been a awkward time, and I'd like to have your opinions as pro luthiers. A new customer brought his old 100$ (maybe less) classi… Started by Pierre-Antoine Roiron in Luthier Talk |
50 |
Jul 13, 2011 Reply by FRANK |
remove ovation neckHey folks, new guy here. So I am a rookie trying to learn. I have a 2003 ovation balladeer. It has two bolts holding the neck, is it glued… Started by scott gannon in Luthier Talk |
17 |
Jul 12, 2011 Reply by Mike Kolb |
Replacing buttons on replica tunersI have a 1920 Gibson A-model mandolin, and I'd like to swap out the original tuning machines for a set of StewMac's replica "Golden Age Res… Started by Jim Magill in Luthier Talk |
4 |
Jul 12, 2011 Reply by Jim Magill |
How did you got started?A few days ago someone asked how I got into Luthiery, so I'd like to know how others got caught in this business. Can we tell how it was fo… Started by Alexander López in Luthier Talk |
8 |
Jul 11, 2011 Reply by Kerry Krishna |
Glue rollerI'm looking for a glue roller that looks like a laminate roller that is used for counter top laminating- the only thing it is, the roller i… Started by Donald A. Fortune in Luthier Talk |
8 |
Jul 10, 2011 Reply by Murray MacLeod |
© 2026 Created by Frank Ford.
Powered by
