Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Ovation finish dilemmaWe have a 'older' Ovation, model AA14-1, the finish has deep cracks all over the soundboard. It should be refinished, but, paint stripper… Started by Chris Rochow in Luthier Talk |
2 |
Feb 28, 2011 Reply by Tim Mace |
apply titebond to damp or dry wood ?????i read somewhere that you should apply titebond to water soaked timber... can't recall where i saw it.. i have always gone the dry route..… Started by nick-p in Luthier Talk |
6 |
Feb 27, 2011 Reply by nick-p |
Gibson J100 with cracked bridgeGood evening. I consider purchasing 15-16 years old Gibson guitar with a very nice voice. The only problem is that she has a cracked bridge… Started by Alex in Luthier Talk |
10 |
Feb 27, 2011 Reply by Chris Rochow |
Crack in top that needs a splintHello again, I have another problem that I would like to get some suggestions about. The problem is I have a guitar in for repair that ha… Started by Justin in Luthier Talk |
7 |
Feb 26, 2011 Reply by Paul Breen |
Gibson LGO with bridge lifting problemHello all! So I just posted about another guitar that I was fixing the bridge on. And in comes another that I have questions about. The g… Started by Justin in Luthier Talk |
13 |
Feb 24, 2011 Reply by Jeffrey L. Suits |
Cedar?I scored from really nice lumber, cutoffs from a custom cabinet shop. I looks like a cross between WR Cedar and Sitka spruce. Some of the… Started by Doug T in Luthier Talk |
4 |
Feb 24, 2011 Reply by Rob Mercure |
Removing Martin pre-ampHi guys , I have a Martin Dc16GTE , with a prefix premium blend pre-amp , the pre-amp has a rattle which is hard to stop , I would like to… Started by Len Biglin in Luthier Talk |
2 |
Feb 23, 2011 Reply by Len Biglin |
Affordable inspection camera !!!So....After rebracing an old Epi accoustic, and regluing some loose brace ends...Fumbling around up to my eblow blindly....Dry run after dr… Started by thefishinmusician in Luthier Talk |
25 |
Feb 23, 2011 Reply by Dave Fox |
What to use to fill in the ends of the fret slots on a maple board?I'm refretting and refinishing a one piece maple bass neck. I need recommendations for what to use to fill in the fret slots under the fret… Started by Mike Baker in Luthier Talk |
6 |
Feb 23, 2011 Reply by Tim Mace |
correct bridge placementi'ma new guy to banjos - would like to make sure the bridge is in the proper place - can i use a tuner and the 12th fret like on a guitar… Started by joe strummer in Luthier Talk |
4 |
Feb 22, 2011 Reply by Tim Mace |
© 2026 Created by Frank Ford.
Powered by
