Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
a new experiment acoustic guitar prodjecti am building a 1 piece top and 1 piece back take a look it is the box in the middle has anyone built like this recently here is the deal h… Started by FRANK in Luthier Talk |
3 |
May 30, 2010 Reply by Pierre-Antoine Roiron |
Why are my frets going in wavy?So Im utterly confused. I'm re-fretting an old Ibanez archtop. Beautiful guitar. - It has binding. - The new fret wire has a radius sm… Started by Christian A Salisbury in Luthier Talk |
7 |
May 29, 2010 Reply by MORCILLO |
Ditson/Martin 2-17I just found out that the Ditson I own was made by Martin. It was made in early 1923 and has couple of repair issues. It was near mint when… Started by Robert M Johnson in Luthier Talk |
1 |
May 29, 2010 Reply by Frank Ford |
Question for Frank (and others) on removal of old pickguardHello Frank (and others of course),I was told to seek your advice on the pickguard issue described below:I’ve recently gotten this lovely o… Started by Hanzalot in Luthier Talk |
9 |
May 28, 2010 Reply by Hanzalot |
Super shrunken fretboard problem...This board in on a '33 Kaykraft '0' that I bought a few weeks ago. The board is just barely glued onto the neck, and needs to come off to… Started by Kerry Krishna in Luthier Talk |
9 |
May 25, 2010 Reply by Kerry Krishna |
Classical guitar, BONE ROLLERSdoes anyone make tuners with bone rollers? if not anyone know wwhere i could find turned bone blanks? thank you Started by kyle lumpkin in Luthier Talk |
3 |
May 24, 2010 Reply by Eugen C |
Intonation issuesA friend was given a 2002 Sigma (Martin import from Korea) guitar with a fishman preamp/under saddle pickup. It is in good shape but has a… Started by LARRY KLOSE in Luthier Talk |
6 |
May 23, 2010 Reply by LARRY KLOSE |
Try fitting a thin card tornavoz.I recently read that a violin soundhole should not be too thin edged or tapered as that will reduce the resonance.I applied that idea to a… Started by John Cadd in Luthier Talk |
32 |
May 23, 2010 Reply by Ned Knepp |
69 Fender Villager Neck Placement/scale length questionI have a Fender Villager in the shop, a 1969 12 string acoustic with removable neck. The neck seats in the head block. Neck is fine but the… Started by Jerry Ryan in Luthier Talk |
4 |
May 22, 2010 Reply by William F.Eden |
Anyone have any info regarding truss rod anchor on a solid maple (fender) neck, vintage style single action,adjuster at bottom.I have taken apart many necks, but have never had the experience of ripping into a solid maple fender neck. What's behind the walnut plug a… Started by Nick Bucci in Luthier Talk |
6 |
May 21, 2010 Reply by Nick Bucci |
© 2026 Created by Frank Ford.
Powered by
