Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
Re-Fret Issue -- Ends of frets not seatingHey all. I've done one refret ever, and it turned out great. But in that case the frets removed where the same size as the frets replaced.… Started by mr smits in Luthier Talk |
13 |
May 30, 2019 Reply by Mike Kolb |
Seagull needs wider neck .So my friend has a seagull parlour which he loves the sound of , but it is narrow at the nut end . Has anyone removed a neck from a seagull… Started by Len Biglin in Luthier Talk |
2 |
May 29, 2019 Reply by Len Biglin |
Anyone here use the Magswitch products?I ran across this today. Looks like the panacea for feather boards and other guides. Found a lot of positive reviews. https://magswitch.com… Started by Allan Bacon in Luthier Talk |
4 |
May 28, 2019 Reply by Frank Ford |
Guild 2005 CV-1 neck reset....Expecting a 2005 Guild CV-1 'Grand Auditorium' this weekend for a look-see. The owner was quoted an hefty amount for a neck reset (and subs… Started by Mike Kolb in Luthier Talk |
4 |
May 25, 2019 Reply by Mark McLean |
Fret tang crimpers/mashersHi, chaps! Looking for cheaper alternative to the StewMac tang crimpers. Any ideas? Started by Keith Somerville in Luthier Talk |
2 |
May 23, 2019 Reply by Allan Bacon |
Pickguard ScarThis is a Martin 1-42 from 1917 that I have owned for many years. At one point somebody had glued on a pickguard that had then been remove… Started by George Roberts in Luthier Talk |
7 |
May 21, 2019 Reply by onewent |
Silvestri Mandolin minus headstockHi everyone , This concerns a mandolin from Silvestri in Sicily , maybe 100yrs old ? Maybe not . Anyway the headstock was broken off and re… Started by Len Biglin in Luthier Talk |
8 |
May 19, 2019 Reply by Len Biglin |
Old Guitar HelpHi I’ve not posted to this forum as I’m too busy reading the postings. It’s excellent and thank you for all the contributions. I have just… Started by MARK HARRIS in Luthier Talk |
2 |
May 18, 2019 Reply by MARK HARRIS |
Strat broken rod .Today's question is a strat with truss rod sheared off in the nut. Its an American std with walnut ring etc . So I've got the nut out but t… Started by Len Biglin in Luthier Talk |
4 |
May 15, 2019 Reply by Len Biglin |
Martin CEO-4R back bow .Hi all , this concerns a limited edition martin "CEO's choice dreadnaught . The neck has a back bow with no tension on truss . Fretboard is… Started by Len Biglin in Luthier Talk |
6 |
May 5, 2019 Reply by Len Biglin |
© 2025 Created by Frank Ford.
Powered by
