Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
Crooked Guitar?Well, this old Guild is becoming well documented, but as long as there are people willing to answer my questions, I'm gonna keep asking the… Started by Brian Farrell in Luthier Talk |
4 |
Sep 23, 2008 Reply by Brian Farrell |
Cloth ReinforcementHello, I've just been looking at the C.F.Martin & Co's various modern interpretations on their early D-18 model. As I'm sure most of y… Started by David Nelson in Luthier Talk |
8 |
Sep 23, 2008 Reply by Ray Hodgson |
Koa SoundboardsHello, I will be finishing my first Koa soundboard very soon and am trying to figure out what to use to fill the pores without inhibiting/… Started by Ray Hodgson in Luthier Talk |
1 |
Sep 22, 2008 Reply by Donald A. Fortune |
Plastic washers on tuners.I have an Epiphone acoustic guitar that recently started having trouble staying in tune. I got out a screwdriver and tightened the screws t… Started by Matthew Koyle in Luthier Talk |
4 |
Sep 21, 2008 Reply by Matthew Koyle |
Need some truss rod adviseHi, I recently finished my first archtop guitar and it worked out ok but I can't get the neck to straighten out. I used a single piece of… Started by Jeff in Luthier Talk |
4 |
Sep 21, 2008 Reply by Frank Ford |
Leaving Strap Button Hole OpenThis is perhaps a ridiculously paranoid question and I'm almost positive the answer has to be "no" but here goes anyway... On a guitar wit… Started by Brent Hutto in Luthier Talk |
3 |
Sep 21, 2008 Reply by Frank Ford |
Nut glueWhat type of glue is best when replacing a nut. Superglue? Wood glue? Started by Wayne Walker in Luthier Talk |
6 |
Sep 19, 2008 Reply by Martin Edwards |
Filling fret slot endsIn Frank Ford's discussion on Frets.com re: refretting a 1973 D-35 (see link below)... http://www.frets.com/FRETSPages/Luthier/Technique/Gu… Started by Brian Farrell in Luthier Talk |
2 |
Sep 18, 2008 Reply by Steve Smith |
Acoustic sustainGreetings, I have a j-40mc Jumbo Martin with an interior pickup. My problem is the low e strings sustains to much causing what is close to… Started by Ed Fry in Luthier Talk |
7 |
Sep 18, 2008 Reply by Ed Fry |
Warp factor 8I purchased 4 b&s sets from the USA and had them sent over to me in the UK. This was about 3 months ago. I'll state straight away that… Started by David Nelson in Luthier Talk |
6 |
Sep 18, 2008 Reply by David Nelson |
© 2025 Created by Frank Ford.
Powered by
