Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
3/4 size guitar?I made my grandson a OO Grand Concert size guitar that he loves. It's too valuable though to take camping or put into the belly of a plane… Started by Jack Lord in Luthier Talk |
19 |
Nov 8, 2010 Reply by John Schmidt |
Fretboard Finish TreatmentHey Guys...I have nearly finished the Final Sanding of my first Bass Guitar Project, and the next steps will be to Stain the guitar and coa… Started by Mark Rowles in Luthier Talk |
5 |
Nov 8, 2010 Reply by Pierre-Antoine Roiron |
Nut disasterSo... I'm doing my first refret and I start to go to work on making the nut. It's a maple neck with maple fingerboard. There was no nut in… Started by Craig Denney in Luthier Talk |
1 |
Nov 8, 2010 Reply by Pierre-Antoine Roiron |
adding pre-amp to Martin DX1Hi Guys , I am about to add a Fishman preamp to to the side of a DX1 with HPL body . Do I need to stiffen the area , or will it be ok ? Its… Started by Len Biglin in Luthier Talk |
6 |
Nov 5, 2010 Reply by William F.Eden |
Old Gibson: loosen fingerboard extensionGreetings, I'm about to undertake a neck reset on a '32 Gibson flat top (neck was never off the guitar). I want to ask your opinions befor… Started by onewent in Luthier Talk |
3 |
Nov 5, 2010 Reply by Howard Klepper |
Tuning issue with electric guitarHi all. I have a Cort Special Series SP-3 electric guitar, which is basically a copy of a Stratocaster. I have an issue with tuning. I have… Started by Arthur Sweeney in Luthier Talk |
19 |
Nov 5, 2010 Reply by Ned Knepp |
Super jumbo fret wire 6000I am looking for a source for the jumbo fret wire. I have a 72 P Bass that have been re-fretted with this wire. It took a hard cymbal hit a… Started by Tom Krebs in Luthier Talk |
5 |
Nov 3, 2010 Reply by Tom Krebs |
Dixie Brand Tenor Banjo W/ Fingerboard SeperationHello All,So I have this tenor banjo in for repair. I'm not really familiar with the brand. Maybe someone knows a little more about them? T… Started by Justin in Luthier Talk |
4 |
Nov 2, 2010 Reply by Justin |
Going from medium frets to jumbo fretsI'm doing my first refret, in fact it's almost done. One thing I wish I would have done differently, and this is my question...Should I ha… Started by Craig Denney in Luthier Talk |
24 |
Nov 2, 2010 Reply by Craig Denney |
How is neck attached on Samick mandolin?This is a kind of recycling project. I intend to remove a bendy bad-grain neck from an arch-top A-model Samick 'greg bennett' mandolin, and… Started by Alys And Simcha in Luthier Talk |
0 | Oct 31, 2010 |
© 2025 Created by Frank Ford.
Powered by
