Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Thick Varnish on a BrunoThis Bruno parlor guitar came with its original coffin case. The guitar itself is about as close to a basket case as they come. It was he… Started by George Roberts |
12 |
Nov 22, 2021 Reply by Chris Vallillo |
Dremel Routing Fret SlotsI have always done the old pick, saw, and/or knife cleaning. I am considering checking out the dremel method with the 1/32" bit. I have dre… Started by Thomas James |
41 |
Nov 16, 2021 Reply by Frank SIlano |
Adding a truss rod to a classical guitar - Neck or sound hole nut?Presented for your consideration............... Another out of the dumpster, and onto my workbench project. I've acquired awhile back old… Started by John Yungbluth |
9 |
Nov 14, 2021 Reply by Taffy Evans |
Broken Bakelite RichenbacherI've got a Ricky Lap steel with a broken neck. It is a clean break where the tenon/neck joins the body. Have any of you had any experience… Started by Don Daringer |
9 |
Nov 9, 2021 Reply by Don Daringer |
Clouded finishLooking for advice on dealing with stubborn white cloudy finish. I have spots resulting from steaming a neck joint (a neck with a broken he… Started by Colin O'Brien |
2 |
Oct 30, 2021 Reply by Mike Kolb |
Binding question...After all these years of tinkering with everyone else's guitars, I'm finally getting around to actually making one of my own! It's been a… Started by Mike Kolb |
5 |
Oct 24, 2021 Reply by Mike Kolb |
Laminated Archtop PlatesLooks like Acme Archtops under new ownership is not in business anymore. Anyone here know of a good source for laminated plates? I am not… Started by Terence Kennedy |
0 | Oct 14, 2021 |
Bridge Pin Spacing ?I am making a replacement bridge for a Bay State parlor guitar. I don't have an original Bay State bridge to copy, so I was using an old o… Started by George Roberts |
3 |
Oct 3, 2021 Reply by Walter W Wright |
Removing Fender style truss rodsHas anyone here had any success removing a headstock adjustment Fender style truss rod without removing the fingerboard? I've seen one onl… Started by Dave Sparrow |
6 |
Sep 24, 2021 Reply by Dave Sparrow |
Gretsch Acoustic resetHi all , I have a gretsch acoustic 7525 with triangle soundhole on by bench , it needs a reset and refret . Does anybody know how these go… Started by Len Biglin |
6 |
Sep 19, 2021 Reply by Roger Häggström |
© 2024 Created by Frank Ford.
Powered by