FRETS.NET

jbbancroft's Discussions (135)

Search Forum

View

Discussions Replied To (126) Replies Latest Activity

"Instead of water use Naphtha, it will easily wick in if it is a crack, water can swe…"

jbbancroft replied Oct 12, 2020 to Tricky Crack Diagnosis Issue

 8 Oct 26, 2020
Reply by Dave Domizi

"If you just apply a thin layer of superglue you won’t need to level and buff as you…"

jbbancroft replied Aug 26, 2020 to First repair would love to hear pro feedback... Question on finishing???

 9 Aug 28, 2020
Reply by J45joe

"If you just apply a thin layer of superglue you won’t need to level and buff as you…"

jbbancroft replied Aug 26, 2020 to First repair would love to hear pro feedback... Question on finishing???

 9 Aug 28, 2020
Reply by J45joe

"It’s going to be nearly impossible to make the cracked lacquer disappear. A simple s…"

jbbancroft replied Aug 25, 2020 to First repair would love to hear pro feedback... Question on finishing???

 9 Aug 28, 2020
Reply by J45joe

"Cut out a sponge the size of the plank, get the sponge wet, and place it on the piec…"

jbbancroft replied Jul 8, 2020 to Removing an old patch/cleat

 3 Jul 24, 2020
Reply by Keith Somerville

"1/2 to  5/8”."

jbbancroft replied Jun 24, 2020 to Guild F-212-XL dovetail

 2 Jun 24, 2020
Reply by Bob Gaddis

"From the picture it doesn’t look that bad. If you just want to remove the dirt I jus…"

jbbancroft replied Jun 17, 2020 to Proper method of cleaning/removing decades of surface dirt, grime & etc. from old lacquer finishes.

 9 Jul 2, 2020
Reply by onewent

"Could you swell the center seam back with moisture, then apply glue to all areas tha…"

jbbancroft replied Jun 17, 2020 to Curving Back Strip

 5 Jul 25, 2020
Reply by George Roberts

"I’m assuming these Mexico made guitars have a bolt on mortise and tenon joint. There…"

jbbancroft replied Jun 9, 2020 to Super glued Martin neck/body joint

 19 Jun 27, 2020
Reply by Brian Stewart

"I’m assuming these Mexico made guitars have a bolt on mortise and tenon joint. There…"

jbbancroft replied Jun 9, 2020 to Super glued Martin neck/body joint

 19 Jun 27, 2020
Reply by Brian Stewart

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service