FRETS.NET

David Kennedy's Discussions (24)

Discussions Replied To (21) Replies Latest Activity

"What's the upper bout?  Tape a 5lb weight (I use small vinyl covered dumbbells) to e…"

David Kennedy replied Sep 19, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"I think I'm going to use the Thomas ginex with a long file to dress the frets when I…"

David Kennedy replied Sep 18, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"Thanks....wish he had a picture."

David Kennedy replied Sep 18, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"I'd like to see a picture of your fret sanding channel.  Please?!!!!  Did you buy it…"

David Kennedy replied Sep 17, 2015 to Are neck jigs necessary?

97 Sep 17, 2015
Reply by steven gallagher

"Makes sense....you're going back through and fixng any hump problem that shows up un…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"  I can ask the same question you asked.  How can you dress a radiused fret with a…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"It sounds like you do a good job....there certainly are a ton of back yard luthiars…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"Your correct....there could be problems with how the frets were put in and such....t…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"You pretty much nailed it.  You've seen guitars that were "attacked by it".  That's…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

"You need to tell me what the shortcut is that you talk about.  The TG levels the fre…"

David Kennedy replied Sep 16, 2015 to radius block to dress frets and fingerboard

22 Sep 19, 2015
Reply by Mark Fogleman

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service