FRETS.NET

Bob Webster's Discussions (357)

Search Forum

View

Discussions Replied To (352) Replies Latest Activity

"Are you going to bend them over a hot iron of some sort or use a Fox bender or equiv…"

Bob Webster replied Mar 11, 2009 to Any tips on Bending Spalted Maple sides?

 23 Mar 16, 2009
Reply by Bob Webster

"Cool. Live it up. No bullet quite like a dodged bullet. Bob"

Bob Webster replied Mar 10, 2009 to Router tear out

 8 Mar 14, 2009
Reply by FRANK

"The white specks probably arose from the CA kicking off too fast, in reaction to who…"

Bob Webster replied Mar 10, 2009 to CA dent repair

 5 Mar 15, 2009
Reply by FRANK

"Well, Dan, I hung back hoping some other kind person would jump in and give you the…"

Bob Webster replied Mar 9, 2009 to Cracked side

 5 Mar 9, 2009
Reply by Mark Dobbins

"Dan, so sorry that you got launched up the learning curve so quickly. It would help…"

Bob Webster replied Mar 9, 2009 to Cracked side

 5 Mar 9, 2009
Reply by Mark Dobbins

"Larry, if you haven't routed the purfling rebate yet, now is the time to see if you…"

Bob Webster replied Mar 9, 2009 to Router tear out

 8 Mar 14, 2009
Reply by FRANK

"So, the $64 question is, how long do you let it sit around at ambient temp and humid…"

Bob Webster replied Mar 8, 2009 to Baking Tops

 8 Mar 9, 2009
Reply by Ned Knepp

"What exactly happened? Did you clip a piece off the wing of one of the bouts or did…"

Bob Webster replied Mar 8, 2009 to Router tear out

 8 Mar 14, 2009
Reply by FRANK

"Not to worry. The smell isn't that bad at all and doesn't linger too long. Ron Fern…"

Bob Webster replied Mar 7, 2009 to Instrument polish

 6 Mar 7, 2009
Reply by Bruce Herrmann

"Thanks for the tip on the bits. Grizzly is just up the road a ways and I can get str…"

Bob Webster replied Mar 7, 2009 to Granite Sanding Slab

 15 May 7, 2009
Reply by Frank Medina

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service