FRETS.NET

Andrew's Discussions (584)

Discussions Replied To (559) Replies Latest Activity

"If thats the one with the perforated surface to collect swarf, be careful with it an…"

Andrew replied Jun 11, 2014 to What to use to sharpen chisels?

18 Jun 23, 2014
Reply by David Farmer

"I have coarse grit dmt stones for the grinding and micro abrasives on glass for honi…"

Andrew replied Jun 11, 2014 to What to use to sharpen chisels?

18 Jun 23, 2014
Reply by David Farmer

"What about some configuration of ratchet straps and supports, and padding as necessa…"

Andrew replied May 8, 2014 to Holding a Cello for Repair

16 May 10, 2014
Reply by Robbie Collins

"I agree with the rest here Hesh, you've judged yourself too harshly. Sometimes a bre…"

Andrew replied May 8, 2014 to When We Cross The Line In Responding To Questions.....

41 May 12, 2014
Reply by Hesh Breakstone

"Thanks, it was a bit of a trick with rattle cans and I wasnt sure about the fade unt…"

Andrew replied May 8, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

"Thankya. It is quite comfortable to play, and nicely balanced. That point on the upp…"

Andrew replied May 8, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

"S'okay. Im pretty jumbled too :). I need to check my phone to know what day it is ha…"

Andrew replied May 6, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

"I worked as a spray finisher at a kitchen place in town for a year, and while the ca…"

Andrew replied May 6, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

"Am I Larry now? :P"

Andrew replied May 5, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

"Peter you are quite right that proper air filtration prior to my 'booth' would provi…"

Andrew replied May 5, 2014 to My latest build.

28 May 8, 2014
Reply by Andrew

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service