FRETS.NET

Ry Charters's Discussions (50)

Discussions Replied To (43) Replies Latest Activity

"I've noticed that sometimes, if the bridge pin holes are "curved" in a semi-circle,…"

Ry Charters replied Jul 24, 2009 to Piezo pick up feeding back

7 Jul 30, 2009
Reply by Rob Mercure

"Is the E string always loud? Or just the E pitch at different positions?"

Ry Charters replied Jul 23, 2009 to Piezo pick up feeding back

7 Jul 30, 2009
Reply by Rob Mercure

"KTM....I know guys who use it and get good results. I sprayed acoustics and electric…"

Ry Charters replied Jul 23, 2009 to Crack repairs and glue joint lines manifesting through lacquer finish

6 Jul 23, 2009
Reply by Ry Charters

"Lacquer will sink into "non wood" areas differently than others. Water based glue wi…"

Ry Charters replied Jul 22, 2009 to Crack repairs and glue joint lines manifesting through lacquer finish

6 Jul 23, 2009
Reply by Ry Charters

"Just a shot in the dark here.....but what if you used silicone gel to fill in the ga…"

Ry Charters replied Jul 15, 2009 to Clear pick guard attachment

8 Jul 15, 2009
Reply by steve spearing

"If you're placing your nut on the angled part of the headstock, you could slide it u…"

Ry Charters replied Jul 13, 2009 to Where the fourteenth fret falls - a first timer asks the community for input...

35 Jul 5, 2014
Reply by Tim Mace

"A guitarmaker friend told me that's what they used at Galloup's school when he was t…"

Ry Charters replied Jul 12, 2009 to silverpen and lacquer?

4 Jul 30, 2009
Reply by Jason Hilbourne

"Sometimes it feels like I spend half of my day sanding..... I set up a couple of qui…"

Ry Charters replied Jul 7, 2009 to I Think I Did Myself A Mischief With Ebony Dust

14 Jul 7, 2009
Reply by Ry Charters

"Well, the binding is off after quite an ordeal. It already had a b/w offset on it, t…"

Ry Charters replied Jul 5, 2009 to Binding repair/old Gibson

15 Apr 9, 2015
Reply by Robbie Collins

"DePaul is a great supplier. I've never bought bone from him though.... Used to get b…"

Ry Charters replied Jul 3, 2009 to Nut Blank Supplier??

14 Aug 22, 2009
Reply by Paul Hostetter

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service