FRETS.NET

Thomas James's Discussions (607)

Discussions Replied To (556) Replies Latest Activity

"I would clamp the guitar upside down while applying the glue to get gravity working.…"

Thomas James replied Nov 4, 2012 to Headstock fracture repair question?

11 Nov 7, 2012
Reply by RETROROD

"Thanks Joshua, I have a friend that makes guns. I'll give him a call. "

Thomas James replied Nov 4, 2012 to Channel Lock Plier Problem?

17 Dec 23, 2012
Reply by John

"My soaking idea was null and void. I will try the tapping and big hammer. I noticed…"

Thomas James replied Nov 3, 2012 to Channel Lock Plier Problem?

17 Dec 23, 2012
Reply by John

"Thanks. I going to try bathing them naptha for while and re-lube.   "

Thomas James replied Nov 3, 2012 to Channel Lock Plier Problem?

17 Dec 23, 2012
Reply by John

"I agree with Hesh that files sometimes need some extra safety added via the sander.…"

Thomas James replied Nov 1, 2012 to Newbie: Seating Frets to Consistent Height; Using cant file correctly.

54 Dec 30, 2012
Reply by Jeffrey L. Suits

"Yes, I have dreamed on that a bit while deep in the Grizzly catalog.  My Dad's machi…"

Thomas James replied Oct 30, 2012 to Drill Mill Lathe

6 Oct 30, 2012
Reply by Thomas James

"Yes. Lacquer. I tried the alcohol. Worked very well. Thanks again everyone. "

Thomas James replied Oct 29, 2012 to Blush Eraser?

19 May 7, 2014
Reply by jbbancroft

"It's good work for us 'John Henry' types."

Thomas James replied Oct 29, 2012 to Am I losing it or what

9 Oct 30, 2012
Reply by Hesh Breakstone

"Thanks everyone for the thoughtful suggestions!  Love this forum. I will start with…"

Thomas James replied Oct 28, 2012 to Blush Eraser?

19 May 7, 2014
Reply by jbbancroft

"Paul, I can't take credit for the design. This just came across my bench. Apparently…"

Thomas James replied Oct 23, 2012 to Hardware B-Bender. Rough, but it works!

2 Oct 23, 2012
Reply by Thomas James

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service