FRETS.NET

Hesh Breakstone's Discussions (826)

Search Forum

View

Discussions Replied To (811) Replies Latest Activity

"Thanks Mark!"

Hesh Breakstone replied Sep 12, 2012 to Help me out of this mess

 12 Sep 14, 2012
Reply by Donald A. Fortune

"Although I admire the "can do" attitude there is a LOT more to fret work, good fret…"

Hesh Breakstone replied Sep 11, 2012 to Help me out of this mess

 12 Sep 14, 2012
Reply by Donald A. Fortune

"I've been playing with rare earth magnets for certain clamping applications and alth…"

Hesh Breakstone replied Sep 8, 2012 to Freebie or Cheapie Tools and Devices

 117 Apr 10, 2017
Reply by Roger Häggström

"What I have done in the past was make a little jig out of wood with a base, two side…"

Hesh Breakstone replied Sep 8, 2012 to Trimming binding before installing

 3 Sep 10, 2012
Reply by Chris Rochow

"Yes you deduced correctly in that there are many ways to fret in locations such as t…"

Hesh Breakstone replied Sep 5, 2012 to Refret jobs: hammer or press???

 15 Sep 9, 2012
Reply by Michael Shaw

"Either/both pressing and tapping in frets for me. Some years ago I had the opportun…"

Hesh Breakstone replied Sep 4, 2012 to Refret jobs: hammer or press???

 15 Sep 9, 2012
Reply by Michael Shaw

"Did someone say scrapers! I use single edged razor blades as a very fine scraper in…"

Hesh Breakstone replied Sep 2, 2012 to Removing scratches on an ebony board

 11 Sep 4, 2012
Reply by tadej bratkovic

"Hi Lonnie - after reading your line about the monkey maybe it's not all that bad tha…"

Hesh Breakstone replied Aug 31, 2012 to String Ball ends

 14 Sep 2, 2012
Reply by lonnie james barber

"If it were mine.... ;) but it's not but nevertheless... I once read about a repair t…"

Hesh Breakstone replied Aug 31, 2012 to Gibson A4 heel crack advice needed on best way to repair

 7 Sep 1, 2012
Reply by Tim Mace

"I like these diamond files from Stew-Mac best and use mine (2 of them) very nearly e…"

Hesh Breakstone replied Aug 15, 2012 to Best Fret Crowning files? Considering buying a few new crowning files. Thanks for suggestions. Also possibly used for SS

 4 Aug 15, 2012
Reply by Patrick Nelson

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service