FRETS.NET

Jeff Highland's Discussions (324)

Discussions Replied To (319) Replies Latest Activity

"Try lowering the relief first to 4 thou then raise the bridge. "big neck relief" giv…"

Jeff Highland replied Apr 9, 2014 to Gibson Firebird with fret buzz

9 Jan 17, 2016
Reply by Swamp Caster

"Yes the tinted (as opposed to pigmented) lacquer would definitely be the way to go f…"

Jeff Highland replied Apr 7, 2014 to Stain on a pine body.

9 Apr 8, 2014
Reply by Glen H

"Pine is pretty hard to stain uniformly. I'd seal it with clear then shoot tinted lac…"

Jeff Highland replied Apr 7, 2014 to Stain on a pine body.

9 Apr 8, 2014
Reply by Glen H

"I believe from previous discussions, that what you guys in the USA get as Tung Oil m…"

Jeff Highland replied Apr 2, 2014 to Tung Oil Finish Question

20 Apr 5, 2014
Reply by William F.Eden

"If you still have finish sanding to do it is not so much of an issue, though sealing…"

Jeff Highland replied Mar 13, 2014 to When to spray wash coat?

2 Mar 13, 2014
Reply by Russell Vance

"I use a local brand of veneer softener and would not bend without it now makes it so…"

Jeff Highland replied Mar 6, 2014 to I'm on a bender

5 Mar 6, 2014
Reply by Mark Dobbins

"That is unacceptable, I would take it back"

Jeff Highland replied Feb 23, 2014 to luthier opinion on Yamaha A3 Series Guitar Please

14 Feb 24, 2014
Reply by Ken H

"Yes I ended up putting in some wood with epoxy"

Jeff Highland replied Feb 21, 2014 to Ovation Bowl repairs

13 Feb 22, 2014
Reply by Hesh Breakstone

"You didn't waste my time at all Russell, that's a valuable repair method to keep in…"

Jeff Highland replied Feb 20, 2014 to Ovation Bowl repairs

13 Feb 22, 2014
Reply by Hesh Breakstone

"Well pulled out the offending section. The strap button will not be going back there…"

Jeff Highland replied Feb 20, 2014 to Ovation Bowl repairs

13 Feb 22, 2014
Reply by Hesh Breakstone

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service