FRETS.NET

FRANK's Discussions (888)

Discussions Replied To (814) Replies Latest Activity

"s o Kerry are you shaping the finger board before slotting or no just leaving it Bla…"

FRANK replied Oct 5, 2011 to Power fret slotting jig I built...

14 Oct 19, 2011
Reply by FRANK

"its not only about HP it is also RPM and also Amps and or watts ? I was fortunate to…"

FRANK replied Sep 28, 2011 to Buffers and such

11 Oct 1, 2011
Reply by Mark A. Kane

"funky cold madina"

FRANK replied Sep 28, 2011 to Show-and-tell time....

16 Sep 29, 2011
Reply by Paul Verticchio

"I see about a $25 difference here .and I agree with FF but If i were in need of this…"

FRANK replied Sep 25, 2011 to Drill press planers?

15 Sep 27, 2011
Reply by Tom Mitchell

"So Ned what if you get a wrighten sales receipt and photographic evidence it to just…"

FRANK replied Sep 17, 2011 to What's this about the Feds going after Gibson?

29 Sep 21, 2011
Reply by STGuitarworks

"I am positive stew mac or Lmii have it"

FRANK replied Sep 16, 2011 to I am in need of 1 bushing

18 Sep 21, 2011
Reply by Matt Haugen

"just fix it how bad can it be right guys"

FRANK replied Sep 15, 2011 to Epiphone 12 String Neck Joint Problem

6 Sep 15, 2011
Reply by charley erck

"yep it is a sad Day so this retro active thingy what about my student guitar I built…"

FRANK replied Sep 7, 2011 to What's this about the Feds going after Gibson?

29 Sep 21, 2011
Reply by STGuitarworks

"jeff you may never eliminate the fine cracks unless cleaned out properly before the…"

FRANK replied Aug 26, 2011 to Polyurethane Blending Techniques

8 Aug 26, 2011
Reply by Jeff Perkins

"try sun light that kills mold and spray a anti fungal like for athletes foot .this i…"

FRANK replied Aug 5, 2011 to moldy gibson

5 Aug 7, 2011
Reply by scott gannon

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service