FRETS.NET

Gary Fried's Discussions (63)

Discussions Replied To (58) Replies Latest Activity

"I took one of these on years ago. While it was a regular dovetail, it required an ex…"

Gary Fried replied Jul 28, 2019 to Guild F512 Neck Set

11 Aug 2, 2019
Reply by Thomas James

"As far as removing the frets, I've used water in extreme situations. Normally I just…"

Gary Fried replied Jun 27, 2017 to Reducing chipping on Ebony fretboard .

11 Oct 16
Reply by Walter W Wright

"Thanks for the replies on this guys. I usually try to accommodate a customer if what…"

Gary Fried replied Jun 25, 2014 to Frets Too Round!!!

11 Jun 26, 2014
Reply by Frank Ford

"Funny you should bring this up as I just had a regular customer ask me to take a loo…"

Gary Fried replied May 14, 2014 to Yamaha dw7-12 string Guitar.

10 May 14, 2014
Reply by Edward green

"If there is good surface area I use a regular two part epoxy to re-glue. I always le…"

Gary Fried replied Aug 29, 2013 to Re-gluing headstock that has been glued up before..

4 Aug 29, 2013
Reply by Gary Fried

"I've repaired these before by both cleating and also with super glue. I'd bet that i…"

Gary Fried replied May 31, 2013 to Martin backpacker crack repair

11 May 31, 2013
Reply by Ned Knepp

"I just got a schecter guitar in for a setup and the nut was/is the same way. The onl…"

Gary Fried replied Apr 4, 2013 to Stripped Fender Truss Rod Nut...

4 Apr 5, 2013
Reply by Paul Verticchio

"I've had many Rick's come through my shop and almost all of the older ones had this…"

Gary Fried replied Mar 26, 2013 to Rickenbacker Truss Rods

5 Mar 27, 2013
Reply by Gregory Hites

"Hi,  I've done partial re-frets to fix ski jumps many times. I only do it if the res…"

Gary Fried replied Feb 22, 2013 to Partial refret to 'fix' a ski jump?

12 Mar 6, 2013
Reply by thefishinmusician

"I don't like string through body on basses especially on the fenders. I don't even k…"

Gary Fried replied Feb 5, 2013 to Fender PBV

8 Feb 15, 2013
Reply by Brian T. Williams

RSS

© 2020   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service