FRETS.NET

Alexander Allgood's Discussions (16)

Discussions Replied To (10) Replies Latest Activity

"Well i can tell you one tho g for sure. That neck is not coming out. I just attempte…"

Alexander Allgood replied Jun 5, 2015 to Aspen AD 28 Neck Joint. Anyone re-set one of these?

8 Jun 5, 2015
Reply by Alexander Allgood

"I think the fingerboard needs to come off. I think this is what I'm looking at.   ht…"

Alexander Allgood replied Jul 13, 2014 to 60's epiphone texan Neck reset.

7 Jul 13, 2014
Reply by Russell Vance

"Ok I got bit of steam in this baby. and the neck won't budge. the cheeks of the neck…"

Alexander Allgood replied Jul 13, 2014 to 60's epiphone texan Neck reset.

7 Jul 13, 2014
Reply by Russell Vance

"the truss rod adjustment does very little when strung up to concert pitch. but works…"

Alexander Allgood replied Jul 12, 2014 to 60's epiphone texan Neck reset.

7 Jul 13, 2014
Reply by Russell Vance

"I had a machinist bore a hole in my arbor press to accommodate their caul, then he a…"

Alexander Allgood replied Aug 28, 2012 to Using an Arbor Press for fretting

23 Aug 29, 2012
Reply by Dan Pennington

"I have used a 3 corner or triangle file since the beginning. In my experience it is…"

Alexander Allgood replied Aug 15, 2012 to Best Fret Crowning files? Considering buying a few new crowning files. Thanks for suggestions. Also possibly used for SS

4 Aug 15, 2012
Reply by Patrick Nelson

"This is exactly that. Js with silver marker. I think your idea may be less time cons…"

Alexander Allgood replied Mar 4, 2011 to clear coating over signature

14 Mar 9, 2011
Reply by STGuitarworks

"Thanks guys, any idea where i can find franks article on this?"

Alexander Allgood replied Mar 3, 2011 to clear coating over signature

14 Mar 9, 2011
Reply by STGuitarworks

"Thanks guys for the input. I think titebond might be best, because there are quite a…"

Alexander Allgood replied Jan 13, 2011 to cracked martin SIde

4 Jan 19, 2011
Reply by Jeff Perkins

"well said."

Alexander Allgood replied Dec 9, 2010 to Cheaper Fret tang cutters

17 Dec 10, 2010
Reply by Ned Knepp

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service