FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

"It depends."

Greg Mirken replied Feb 25, 2021 to Maxing out a banjo coordinator rod?

10 Feb 27, 2021
Reply by Ryan Matzen

"Dovetail joints don’t shift; flattop guitar neck resets are necessary because of bod…"

Greg Mirken replied Feb 19, 2021 to Any way to flatten a maple fingerboard

8 Mar 7, 2021
Reply by Frank Capo

"I thought you were considering adding a rod. The neck has rotated relative to the bo…"

Greg Mirken replied Feb 19, 2021 to Any way to flatten a maple fingerboard

8 Mar 7, 2021
Reply by Frank Capo

"I think the distinct kink at the heel region explains your high action. Don't worry…"

Greg Mirken replied Feb 18, 2021 to Any way to flatten a maple fingerboard

8 Mar 7, 2021
Reply by Frank Capo

"To add to Frank’s comment, there’s no pressing need to have something done; in the m…"

Greg Mirken replied Feb 13, 2021 to Gibson neck heel damage

3 Feb 13, 2021
Reply by Greg Mirken

"Don't do anything yourself. Any attempt to seal or otherwise protect the damage will…"

Greg Mirken replied Feb 12, 2021 to Gibson neck heel damage

3 Feb 13, 2021
Reply by Greg Mirken

"But not too shallow an angle, lest you drill into the X brace... I've seen that. "

Greg Mirken replied Feb 7, 2021 to Braided piezo pickup

6 Feb 11, 2021
Reply by wood addict

"I’m afraid the response to your question reflects the enthusiasm for this type of pi…"

Greg Mirken replied Feb 7, 2021 to Braided piezo pickup

6 Feb 11, 2021
Reply by wood addict

"What Paul said. I've seen lots of 19th Century mandolin and guitar frets that were b…"

Greg Mirken replied Jan 17, 2021 to Old Frets - General Question

4 Jan 18, 2021
Reply by onewent

"Always use a mask around the bridge. All it takes is corrugated cardboard covered wi…"

Greg Mirken replied Jan 16, 2021 to top seem

7 Jan 30, 2021
Reply by Colin O'Brien

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service