FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"You are exactly right- the slot for the saddle was shallower than a modern short sad…"

Greg Mirken replied Jun 11, 2009 to Cut-Through Saddles

 1 Jun 11, 2009
Reply by Greg Mirken

"Well, one indication certainly is if the relief measures very different on the two o…"

Greg Mirken replied Jun 9, 2009 to question on neck

 6 Jun 17, 2009
Reply by Christian Johnson

"Oooh, I bet that's got some sustain, baby!"

Greg Mirken replied Jun 1, 2009 to New Epiphone Dove - A low mark?

 6 Jun 3, 2009
Reply by Jeffrey L. Suits

"Charlie, I believe water vapor will slowly penetrate any lacquer finish, so the best…"

Greg Mirken replied May 29, 2009 to finish inside of guitar??

 3 May 31, 2009
Reply by Ron Frazier

"What's the rationale behind setting up an instrument so it plays flat?"

Greg Mirken replied May 6, 2009 to Intonation

 32 Jun 23, 2009
Reply by John Cadd

"John, that looks to me to have been built from a Stewart MacDonald kit."

Greg Mirken replied May 5, 2009 to Identification of Banjo

 9 May 5, 2009
Reply by John Holloman

"Is your reason for identifying the banjo to decide whether to use a geared or fricti…"

Greg Mirken replied May 5, 2009 to Identification of Banjo

 9 May 5, 2009
Reply by John Holloman

"I'd say what you are doing wrong is refinishing vintage guitars. Unless more than 50…"

Greg Mirken replied May 5, 2009 to Split in finish after refinishing from an old repair

 6 May 6, 2009
Reply by Mike Kolb

"Brent, I don't think I would try to get higher action with a taller saddle, at least…"

Greg Mirken replied Apr 28, 2009 to Implications of a High Saddle/Shallow Neck Angle

 12 May 20, 2009
Reply by Tim Mace

"FYI, that's not a shallow neck angle, just the reverse. Sounds like your builder del…"

Greg Mirken replied Apr 28, 2009 to Implications of a High Saddle/Shallow Neck Angle

 12 May 20, 2009
Reply by Tim Mace

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service