FRETS.NET

Jeffrey L. Suits's Discussions (279)

Search Forum

View

Discussions Replied To (279) Replies Latest Activity

"I suppose the two bolts are enough to hold the neck in place.   Absolutely--why woul…"

Jeffrey L. Suits replied Sep 30, 2011 to Do I need a neck reset?

 13 Sep 30, 2011
Reply by Jeffrey L. Suits

"What they lacked in engineering and execution, they made up for with titebond.  Lots…"

Jeffrey L. Suits replied Sep 28, 2011 to Do I need a neck reset?

 13 Sep 30, 2011
Reply by Jeffrey L. Suits

"You will be amazed at the improvement in volume and tone once the reset is done and…"

Jeffrey L. Suits replied Sep 27, 2011 to Do I need a neck reset?

 13 Sep 30, 2011
Reply by Jeffrey L. Suits

"Mike Kolb said:   "It's false economy to just try to save a few bucks with an inferi…"

Jeffrey L. Suits replied Sep 21, 2011 to Drill press planers?

 15 Sep 27, 2011
Reply by Tom Mitchell

"JLD Bridge System.  "

Jeffrey L. Suits replied Sep 13, 2011 to Should I bother.... Japanese "Conqueror"

 6 Sep 16, 2011
Reply by John Cartwright

"Why I went to soundboard transducers, 15 or so years ago...  "

Jeffrey L. Suits replied Sep 3, 2011 to Martin under saddle transducer...Little, if any, output on high E

 7 Sep 3, 2011
Reply by Jeffrey L. Suits

"Pull the saw backwards for the first few strokes.   Yes, the spacing rule is worth e…"

Jeffrey L. Suits replied Aug 1, 2011 to Cutting nut slots accurately

 24 Aug 6, 2011
Reply by Mark Pollock

"Start screaming, "Get out! Get out of here!", pick up a hatchet, start waving it aro…"

Jeffrey L. Suits replied Jul 7, 2011 to How to deal with a dissatisfied customer you don't agree with?

 50 Jul 13, 2011
Reply by FRANK

"...and there's the customer who came in because there was a buzz somewhere, and hamm…"

Jeffrey L. Suits replied Jul 7, 2011 to How to deal with a dissatisfied customer you don't agree with?

 50 Jul 13, 2011
Reply by FRANK

"http://www.rockler.com/product.cfm?page=5525&source=googleps&utm_source=Goog…"

Jeffrey L. Suits replied Jul 7, 2011 to Glue roller

 8 Jul 10, 2011
Reply by Murray MacLeod

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service