FRETS.NET

Bob Gaddis's Discussions (128)

Discussions Replied To (110) Replies Latest Activity

"I think I would try a "Bridge Doctor" on it. If it works, great, if not, take it out…"

Bob Gaddis replied Oct 9, 2014 to Martin DXM after a car trunk heating

28 Oct 12, 2014
Reply by Jelle van Tilburg

"thanks "

Bob Gaddis replied May 4, 2013 to EM-150 wiring

6 May 4, 2013
Reply by Bob Gaddis

"Sorry, It's a P-90.  It's a mess."

Bob Gaddis replied May 4, 2013 to EM-150 wiring

6 May 4, 2013
Reply by Bob Gaddis

"Thanks so much. This currently has two 250K pots and a 6PS-520 +/- 10%. .02@600DC ca…"

Bob Gaddis replied May 4, 2013 to EM-150 wiring

6 May 4, 2013
Reply by Bob Gaddis

"8-32 threads. I ordered a piece of water-hardened drill rod 9/64" and will thread bo…"

Bob Gaddis replied May 3, 2013 to 1950's EM 150 truss rod replacement & binding.

2 May 3, 2013
Reply by Bob Gaddis

"OK, I  called Randy Wood and he advised me how to remove the truss rod. I had to rem…"

Bob Gaddis replied May 2, 2013 to 1950's EM 150 truss rod replacement & binding.

2 May 3, 2013
Reply by Bob Gaddis

"Ihave two guitars with Englemann and I think that's going to be my choice."

Bob Gaddis replied Jan 10, 2013 to Washburn New Model

7 Jan 10, 2013
Reply by Eric Steven Johansen

"I bought a top from Constantine's years ago when I first got this. It's just too wid…"

Bob Gaddis replied Jan 10, 2013 to Washburn New Model

7 Jan 10, 2013
Reply by Eric Steven Johansen

"Permalink"

Bob Gaddis replied Jan 8, 2013 to Need one Kluson Tuner eyelet 1952 Gibson EM-150

5 Jan 9, 2013
Reply by John

"The outer dimension is 1/2" The shaft is 1/4" The depth of the eyelet is 1/4" Nickel…"

Bob Gaddis replied Jan 8, 2013 to Need one Kluson Tuner eyelet 1952 Gibson EM-150

5 Jan 9, 2013
Reply by John

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service