FRETS.NET

Martin Bell's Discussions (16)

Discussions Replied To (11) Replies Latest Activity

"This might sound silly, but... why not bind the wedge?"

Martin Bell replied May 7, 2017 to Martin Neck Reset

19 May 17, 2017
Reply by Mark McLean

"Well, after finding and gluing up a very tight crack in the back, and re-running all…"

Martin Bell replied Jan 20, 2016 to The infernal rattling!

5 Jan 20, 2016
Reply by Martin Bell

"Good thought, but no... the latest is a standard joint. Although, I did once have a…"

Martin Bell replied Jan 18, 2016 to The infernal rattling!

5 Jan 20, 2016
Reply by Martin Bell

"The nut slots might be too wide, or not cut with a sufficient angle that the strings…"

Martin Bell replied Dec 19, 2015 to Nut Buzz on 3 String (Banjo)

2 Dec 20, 2015
Reply by Mark McLean

"I'm going with Greg... Naphtha. If in doubt, naphtha, let it dry, a light sanding, n…"

Martin Bell replied Aug 5, 2015 to Cleaning surface for double stick velco

5 Aug 6, 2015
Reply by Mark Fogleman

"I was kind of surprised to see it missing as well. I initially checked for a bolt us…"

Martin Bell replied Sep 13, 2014 to Martin 000-15M needs a neck reset...

9 Jun 19, 2022
Reply by Thomas James

"Thanks! I actually read that article when researching this. I've found a bolt that f…"

Martin Bell replied Sep 13, 2014 to Martin 000-15M needs a neck reset...

9 Jun 19, 2022
Reply by Thomas James

"There is a part of me... that wants to make this thing work... Maybe set it up for s…"

Martin Bell replied May 16, 2014 to Vintage Fender Fret Challenge

12 May 20, 2014
Reply by Ron frazier

"Nice! That looks so clean! Did you have to scribe or cut through the lacquer/poly be…"

Martin Bell replied Mar 4, 2014 to Can someone shed historic light on the way Fender installed frets?

13 Mar 4, 2014
Reply by Martin Bell

"Well, just a quick update... I ditched the nibs, fixed the divots a la Frank Ford wi…"

Martin Bell replied Dec 6, 2013 to Binding nibs and a refret...

22 Dec 7, 2013
Reply by LARRY KLOSE

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service