FRETS.NET

Andrew's Discussions (584)

Discussions Replied To (559) Replies Latest Activity

"Nice. Did you cut the stew mac hose in two for that, or get another piece to go from…"

Andrew replied Sep 27, 2013 to Neck steaming temperature?

16 May 14, 2021
Reply by Roger Häggström

"I think the main issue there is that the wood will want to go back to its former sha…"

Andrew replied Sep 27, 2013 to Backbow Suggestions Needed

20 Sep 30, 2013
Reply by Robbie Collins

"Interesting. Ill start by insulating the hose and see what happens with the sputteri…"

Andrew replied Sep 27, 2013 to Neck steaming temperature?

16 May 14, 2021
Reply by Roger Häggström

"I did notice youve fretted twice. Sometimes things just fight. Hopefully your chosen…"

Andrew replied Sep 26, 2013 to Backbow Suggestions Needed

20 Sep 30, 2013
Reply by Robbie Collins

"When you installed the frets initially, did you clean the fretwire with acetone befo…"

Andrew replied Sep 26, 2013 to Backbow Suggestions Needed

20 Sep 30, 2013
Reply by Robbie Collins

"Ive been keeping my eye out for an espresso maker that i could convert without messi…"

Andrew replied Sep 24, 2013 to Neck steaming temperature?

16 May 14, 2021
Reply by Roger Häggström

"The palette knife is a good idea. Get some good light and mirrors in there. Occasion…"

Andrew replied Sep 23, 2013 to 1976 Martin D-18 came in to my shop...need some advice

5 Sep 24, 2013
Reply by steve carmody

"Seconded. That seems like the wisest approach to me. Ian, you can buy arbor presses…"

Andrew replied Sep 23, 2013 to Should I hammer or press these frets?

15 Sep 23, 2013
Reply by Andrew

"If it was me, Id use a good bevel up handplane with a high angle blade and tight mou…"

Andrew replied Sep 23, 2013 to Split Headstock

23 Apr 1, 2014
Reply by Kerry Krishna

"The bridge did not appear to have been reglued. It had certainly been strung with no…"

Andrew replied Sep 23, 2013 to Tilted bridge pin holes.

7 Sep 23, 2013
Reply by Ned Knepp

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service