FRETS.NET

William F.Eden

William F.Eden's Discussions (102)

Discussions Replied To (97) Replies Latest Activity
Evan Bradley

"Thats a fine guitar you have there Ron .It just shows what you can do with some on..."

William F.Eden replied Nov 20 to One man's gathers what another man spills - Hunting for wood (legally of course!)

21 Nov 28
Reply by M.R.S
greg jacobs

"If you got the ends of the grain up when you look down at them you have it right. ..."

William F.Eden replied Nov 18 to scalloped braces glued down with grain running vertically instead of horizontally

17 Nov 19
Reply by greg jacobs
Mac McElwain

"Sorry I thought you were using a water bace Lacquer Bill.""""""""""

William F.Eden replied Nov 17 to Spraying Sunbursts

4 Nov 17
Reply by William F.Eden
Mac McElwain

"I would try the water stain on bare wood .With the sprayer. Then start with a vear..."

William F.Eden replied Nov 17 to Spraying Sunbursts

4 Nov 17
Reply by William F.Eden
Evan Bradley

"Good luck I would give my eye teeth for some of that 200 year old 1\4 cut Spruce e..."

William F.Eden replied Nov 16 to One man's gathers what another man spills - Hunting for wood (legally of course!)

21 Nov 28
Reply by M.R.S
David Houchens

"Dave when I build a 12 fret I move the x bracing down further from the hole and pu..."

William F.Eden replied Nov 15 to 12 fret neck on 14 fret body

11 Nov 17
Reply by Magnus Hultin
David Houchens

"I seem to be missing some thing here or maybe not as I under stand it .If you are ..."

William F.Eden replied Nov 15 to 12 fret neck on 14 fret body

11 Nov 17
Reply by Magnus Hultin
Fred Capo

"My advice is the same as Franks .Do you want to sell it or play it ? That is up to..."

William F.Eden replied Nov 12 to Opinions and Advice Requested on Top Restoral

5 Nov 14
Reply by Bob Gaddis
Rob

"Check out this guys site if you havn't already [ Vintage Guitar info] he seems to ..."

William F.Eden replied Nov 12 to 1968 D-18 Martin Specs

10 Nov 14
Reply by Bob Gaddis
stringer

"Thats quite a Guitar you have there Matt .If it were mine I would first get the tw..."

William F.Eden replied Nov 9 to 1948 Martin with a hole (lot of issues)

4 Nov 13
Reply by Frank Ford
  • First
  • Previous
  • Next
  • Last
  • Page 1 of about 10

RSS

© 2009   Created by Frank Ford on Ning.   Create a Ning Network!

Badges  |  Report an Issue  |  Privacy  |  Terms of Service