FRETS.NET

Roger Häggström's Discussions (571)

Discussions Replied To (525) Replies Latest Activity

"Yes, an old capo made that damage :-) You can try to put water on the dents using sm…"

Roger Häggström replied Jun 12, 2017 to neck reset regal guitar?

31 Oct 16, 2017
Reply by Lee Gendvilas

"One or two rods in no major issue, you can have two thin ones or one thick one. The…"

Roger Häggström replied Jun 12, 2017 to neck reset regal guitar?

31 Oct 16, 2017
Reply by Lee Gendvilas

"A neck reset is always possible. The screw is a typical hack, I've seen many like th…"

Roger Häggström replied Jun 10, 2017 to neck reset regal guitar?

31 Oct 16, 2017
Reply by Lee Gendvilas

"A picture of my file and the protecting metal plate. The file was smaller than I tho…"

Roger Häggström replied Jun 9, 2017 to Fret Ends vs. Lacquer

20 Jun 9, 2017
Reply by Roger Häggström

"Before you glue the bridge, make sure it has a flat surface towards the top. If it's…"

Roger Häggström replied Jun 7, 2017 to 1966 Harmony 910 Bridge

10 Jun 8, 2017
Reply by Steve Bettesworth

"I might add that I did buy one of these purposely made fret end beveler blocks with…"

Roger Häggström replied Jun 6, 2017 to Fret Ends vs. Lacquer

20 Jun 9, 2017
Reply by Roger Häggström

"I also use an old worn out file, but it's the whole flat file without the handle. It…"

Roger Häggström replied Jun 6, 2017 to Fret Ends vs. Lacquer

20 Jun 9, 2017
Reply by Roger Häggström

"I have seen many guitars with bolts or screws on the bridge, most of them was very c…"

Roger Häggström replied Jun 5, 2017 to 1966 Harmony 910 Bridge

10 Jun 8, 2017
Reply by Steve Bettesworth

"Hot hide glue on clean wood is all you need :-)"

Roger Häggström replied Jun 5, 2017 to 1966 Harmony 910 Bridge

10 Jun 8, 2017
Reply by Steve Bettesworth

"Got some feedback from the customer. I'm happy to say that he heard exactly the same…"

Roger Häggström replied Jun 2, 2017 to Modified bridge plate för greater volume

13 Jun 21, 2017
Reply by Roger Häggström

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service