FRETS.NET

Howard Klepper's Discussions (166)

Search Forum

View

Discussions Replied To (165) Replies Latest Activity

"From all that you have said, it seems that his other guitars have taller frets, and…"

Howard Klepper replied Jun 29, 2015 to Another difficult customer... What more can I do?

 42 Jul 11, 2015
Reply by Luke Single

"I cannot see the point of using screw jacks or jack posts (what I think people mean…"

Howard Klepper replied May 10, 2015 to X brace crack repair

 12 May 10, 2015
Reply by David Farmer

"Grizzly has a good 12" disc/6x48" belt sander that comes with either a 3500 or 1750…"

Howard Klepper replied Apr 28, 2015 to Router Speed Controller?

 15 Apr 28, 2015
Reply by Howard Klepper

"the problem is not the vinyl or PVC.  "Hard vinyl" such as Boltaron or the stuff Gib…"

Howard Klepper replied Apr 26, 2015 to PVC & Nitrocellulose Lacquer: Do they react?

 16 May 1, 2015
Reply by John Cartwright

"Short answer is no.  Routers use universal motors, with speed control from a thyrist…"

Howard Klepper replied Apr 26, 2015 to Router Speed Controller?

 15 Apr 28, 2015
Reply by Howard Klepper

"I did one like that 40 years ago, but I don't recall exactly what needed repair.  It…"

Howard Klepper replied Feb 24, 2015 to Tricky truss rod repair on Gibson ES135

 2 Feb 24, 2015
Reply by Frank Ford

"How far in does your feeler go? Is that maccassar ebony?"

Howard Klepper replied Jan 19, 2015 to Slightly lifting and warped bridge - should it be replaced now or later?

 16 Jan 21, 2015
Reply by Peter Poyser

"This is not the fretboard crack that requires realignment by pulling the neck back. …"

Howard Klepper replied Jan 19, 2015 to Yet another soundhole crack - cause and repair

 13 Feb 19, 2015
Reply by Ned Knepp

" Fine Woodworking did a test a few years ago--it's performance was identical with fr…"

Howard Klepper replied Jan 16, 2015 to Old brown glue

 4 Jan 16, 2015
Reply by sylvan

"There are a few different kinds of "brad point" bits.  The best are what is called a…"

Howard Klepper replied Jan 8, 2015 to brad point drill bits

 10 Jan 9, 2015
Reply by Mike Kolb

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service