I will be finishing my first Koa soundboard very soon and am trying to figure out what to use to fill the pores without inhibiting/degrading any potential vibration of the top. Currently, I use Z-Poxy for all my hardwood B&S and am very happy with the results.

I would welcome any suggestions or opinions on finishing hardwood soundboards. (Koa)

Thank You,


Views: 67

Reply to This

Replies to This Discussion

Hi Ray-- Theres an old saying that goes like this "dont fix it unless its broken"
I have a tendency to go with what works and disgard the rest--
Be well......


© 2020   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service