FRETS.NET

Hey guys!
I have heard that on some Gibson Jumbos and other guitars like Ibanez Concords that the neck is usually overset in order to have a good breakover angle at the saddle/bridge pins. I am currently restoring one, and the neck joint is coming apart. I think it needs a neck reset.
What is a typical overset amount for these type of guitars with this saddle and bridge pin layout? I'd like to know a ballpark amount that I can shoot for..

Cheers!
Mike

Views: 99

Reply to This

Replies to This Discussion

Attachments:

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service