FRETS.NET

This question is the opposite of what is usually posted.

I dislike strap pins at the heel and wonder how to plug the hole left by the screw

Views: 538

Reply to This

Replies to This Discussion

As far as getting the dowel the right diameter, a trick I learned from a very well regarded luthier is to cut a piece of dowel to the length of a drill bit ( about 3 inches) and put it into a hand drill, then run it against a belt sander. You can very accurately and quickly reduce the diameter of the dowel to the right size. 

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service