Miles -
Yep, that's it - just a regular masonry bit and some epoxy - I set the magnets just about flush with the surface, maybe a bit below, so I could sand off the epoxy that stuck up higher. They're 3/8 x 3/8 cylinders, but size really doesn't matter. . .
I see no immediate problem - we're all friends here, I hope.
F2
Join FRETS.NET
Welcome toFRETS.NET
Sign Upor Sign In
LARRY KLOSE
Frank Ford
Mark Riess
Carl Dickinson
© 2024 Created by Frank Ford. Powered by
Badges | Report an Issue | Terms of Service
Please check your browser settings or contact your system administrator.
Comment Wall (2 comments)
Miles -
Yep, that's it - just a regular masonry bit and some epoxy - I set the magnets just about flush with the surface, maybe a bit below, so I could sand off the epoxy that stuck up higher. They're 3/8 x 3/8 cylinders, but size really doesn't matter. . .
I see no immediate problem - we're all friends here, I hope.
F2
You need to be a member of FRETS.NET to add comments!
Join FRETS.NET