Forum Discussions (4,424)
| Discussions | Replies | Latest Activity |
|---|---|---|
Ivory tuning pegsHello I need help finding ivory tuning pegs for a 1903 Martin. Anybody have a couple? Thanx Started by David Drain in Luthier Talk |
1 |
Jan 25, 2009 Reply by Bruce Herrmann |
Wolf tone/dead note question?Recently I've been noticing that when I play a "G" on the high "E" string that it sounds like it's quieter and maybe a little fuzzy compare… Started by gordon in Luthier Talk |
12 |
Jan 24, 2009 Reply by Bob Webster |
Neck resetI have an old Framus Texan 12 string with a bolt on neck. I need to reset the angle on this neck and am unsure how to do it. Do you just sh… Started by Robert M. Cleworth Jr. in Luthier Talk |
8 |
Jan 23, 2009 Reply by Ned Knepp |
Upper bout sound holes vs standard sound holeSome claim that moving the sound hole to the upper bout gives a larger area of the top for resonance. If this is so why are there so few lu… Started by Richard Smith in Luthier Talk |
7 |
Jan 22, 2009 Reply by Ron Frazier |
Collings Fretboard ShaperThe Collings fretboard shaper looks just like the tool I want to use in my workshop. Please, if anyone out there has pictures or drawings o… Started by Robert van der Linde in Luthier Talk |
5 |
Jan 22, 2009 Reply by FRANK |
ebony fingerboard dyeanyone ever put this stuff on rosewood? what happened? bad idea? good idea? Started by northwestcurt in Luthier Talk |
2 |
Jan 22, 2009 Reply by FRANK |
A Twist in my customers Neck 70 fender ?Today a customer who happened to have a 70s fender strat has really bad twist in the Neck I have seen this but don't do to much with it. I… Started by FRANK in Luthier Talk |
4 |
Jan 21, 2009 Reply by Russell Vance |
stripped gibson truss rod nutworkin on a gibson with a stripped truss rod nut, any suggestions on gettin it off? Started by Mark Dobbins in Luthier Talk |
7 |
Jan 20, 2009 Reply by thefishinmusician |
wore thru finish on larravee neckHi all, I have a really nice larravee i am working on, my customer has worn clear thru the finish on the back of the neck, i have sanded wt… Started by Mark Dobbins in Luthier Talk |
1 |
Jan 20, 2009 Reply by Jim Bancroft |
Reinforcing a Truss RodI'm restoring my 1971 Martin D-35. I already replaced the 1/4" braces with 5/16" scalloped (due to too much bellying) and the large RW brid… Started by Mike Mancini in Luthier Talk |
10 |
Jan 20, 2009 Reply by Mike Mancini |
© 2026 Created by Frank Ford.
Powered by
