Forum Discussions (4,411)
| Discussions | Replies | Latest Activity |
|---|---|---|
A great trip to the Goodwill today....... Hows abouts yous?I had a really nice visit to the goodwill today. I found myself an espresso machine (that works) for my neck steamer and right next to it w… Started by Matt Haugen in Luthier Talk |
8 |
Mar 17, 2009 Reply by Bob Webster |
L.P. with a really strange problem.Hi all , I am looking at a Gibson Les Paul which I fret dressed about a month ago.The strings are being shaped into a kink around each fret… Started by Len Biglin in Luthier Talk |
6 |
Mar 17, 2009 Reply by Len Biglin |
A warning re denatured alcohol in French polishingDuring the French polishing of the last three or four of my guitars, I've had the skin on my fingers eventually slough off and peel away to… Started by Bob Webster in Luthier Talk |
6 |
Mar 16, 2009 Reply by Ned Knepp |
Rise in back stripI have a small problem with a zipperd back strip when I cut the channel for it I got it a tad to big. So I sliped a piece 1/28 maple veneer… Started by William F.Eden in Luthier Talk |
11 |
Mar 16, 2009 Reply by Ned Knepp |
Any tips on Bending Spalted Maple sides?well I am getting ready to build a couple Guitars just thought I would ask before I got in to things like bending anyone with experience be… Started by FRANK in Luthier Talk |
23 |
Mar 16, 2009 Reply by Bob Webster |
Not jeebus in a tater chip..howeverThought I'd share this w/ya'll.While testing stain on curly maple I turned the piece of wood over to find what seems to be a miraculous ico… Started by Tim Mace in Luthier Talk |
1 |
Mar 15, 2009 Reply by Tim Mace |
Tell the customer or no?I have a guitar in for action adjustment. It is a strat type guitar with bolt on neck. In adjusting action I have found that when I get to… Started by Mike Baker in Luthier Talk |
8 |
Mar 15, 2009 Reply by Mike Baker |
Froggy Bottom truss adjustment.Does any one know how to adjust a truss rod on a froggy bottom guitar using common tools?Len Started by Len Biglin in Luthier Talk |
4 |
Mar 15, 2009 Reply by Len Biglin |
How to shim a saddle ( follow up to my previous)I have a Norman ST 40 with a Tusq or Micarta saddle that I need to shim. Any ideas about what type of material to use? Started by Wayne Walker in Luthier Talk |
9 |
Mar 15, 2009 Reply by Wayne Walker |
CA dent repairI'm still learning.... I used tips from here on repairing small dings in a soundboard with superglue. I cleaned the dents with naptha, fill… Started by Jerry Ryan in Luthier Talk |
5 |
Mar 15, 2009 Reply by FRANK |
© 2025 Created by Frank Ford.
Powered by
