Forum Discussions (4,411)
| Discussions | Replies | Latest Activity |
|---|---|---|
Martin body cracked along fingerboard, one side onlyPatient is a newer Martin which has cracked on the body on the treble side...It's a bolt on, and I'm wondering if removing the neck may mak… Started by thefishinmusician in Luthier Talk |
12 |
Apr 3, 2009 Reply by David Houchens |
stained fingerboardI'm refretting an older epiphone before they were bought out by gibson. The fingerboard needed some sanding and I am finding out that it ha… Started by Colin Brown in Luthier Talk |
7 |
Apr 3, 2009 Reply by Mark Tripp |
Advice: Epi Granada / 120T top sink problemHello everyone / anyone, I have an Epi Granada (same as a 120T, I've included a generic pict) and over the years the top has kept going do… Started by samhill in Luthier Talk |
2 |
Apr 1, 2009 Reply by samhill |
Are Classical Guitar Saddles Typically Notched?The only nylon-string guitar I've ever owned was about 32 years old when I bought it a few months ago. There are tiny notches under each st… Started by Brent Hutto in Luthier Talk |
10 |
Apr 1, 2009 Reply by Bob Webster |
guild mark 2 face refinishhey folks I need your help again. I just removed a lifting bridge from an old Guild nylon sting mark2. unfortunately the bridge had came of… Started by vince sauter in Luthier Talk |
2 |
Apr 1, 2009 Reply by vince sauter |
Binding gap on 1990s GuildPatient is a Guild American, late 90s. Binding shrunk and popped off at waist on both sides. Removed to relieve stress and re-glued. I've g… Started by Christian Johnson in Luthier Talk |
3 |
Mar 30, 2009 Reply by Jim Bancroft |
Converting a backloading bridge to a pin bridgeThe patient looks to be a Harmony or Harmony knock off...It had a back loading bridge...( Like an Ovation )..The music store lost the origi… Started by thefishinmusician in Luthier Talk |
3 |
Mar 28, 2009 Reply by Frank Ford |
JLD Bridge Doctor on a laminate top?I have an early-70's Harmony, one of the few made with laminates (I guess I'm just lucky!) The top has bellied so much that the corners of… Started by Rick Homan in Luthier Talk |
3 |
Mar 28, 2009 Reply by Rick Homan |
Spruce Top Worry - Advice Appreciated.Hi, not a "worry" really, just an enquiry. I recently re-fitted an internal Fishman gooseneck microphone, as the previous fitting (Velcro t… Started by onemanband in Luthier Talk |
5 |
Mar 28, 2009 Reply by onemanband |
Eucalyptus, acaccia in BerkeleyHey, Living near enough to Berkeley to keep up a little with its politics, I noticed a bit about the eucalyptus removal. The first link is… Started by Doug T in Luthier Talk |
11 |
Mar 24, 2009 Reply by Russell Vance |
© 2025 Created by Frank Ford.
Powered by
