Forum Discussions (4,411)
| Discussions | Replies | Latest Activity |
|---|---|---|
Wiring Diagram Please?Hi gang a lad over on Lets Talk Guild.com site is in desperate need of a schematic for his 1965 Guild electric Tunderbird . Should someone… Started by Rob in Luthier Talk |
5 |
Feb 20, 2009 Reply by Rob |
What did you say about re-attaching pickguards to bare wood?I received an old Gibson with the pickguard removed. There isn't a speck of residue on the underside of the guard and the footprint on the… Started by Matt Haugen in Luthier Talk |
6 |
Feb 19, 2009 Reply by Frank Ford |
adjustable bridgeI'm fixing up an old slope shouldered J45 with the adjustable style bridge. Most of the bridge, the saddle and the two posts that adjust th… Started by David Houchens in Luthier Talk |
5 |
Feb 18, 2009 Reply by David Houchens |
Jimmy Vaughan Strat fret buzzOk, so I got this job, for a Jimmy Vaughan Strat. I get it home, there's almost no relief in the neck. I adjust the truss rod, bringing the… Started by Kevin Swaim in Luthier Talk |
21 |
Feb 18, 2009 Reply by Len Biglin |
New Bridge / Top BellyNew bridge going on a top with a pretty good belly in it. I'm afraid that clamping a bridge with a truly flat bottom will cause too much st… Started by Brian Farrell in Luthier Talk |
24 |
Feb 16, 2009 Reply by Jim Bancroft |
where to get bar fret wireI need bar fret wire for an old restoration. Anyone know a good source Started by jason Burns in Luthier Talk |
11 |
Feb 16, 2009 Reply by Frank Ford |
hum active electronics ?Hum I have a bass Guitar and was reading about wire ing a capacitor and a resistor inline with the bridge ground to eliminate noise when I… Started by FRANK in Luthier Talk |
15 |
Feb 16, 2009 Reply by Ned Knepp |
string going under fretnew to forum, i have a used [ebay] Epiphone Les Paul standard,small e string going under fret. I have mastered everthing i put my mind to f… Started by bruce in Luthier Talk |
8 |
Feb 15, 2009 Reply by bruce |
Trying to figure out a way to "clamp" a neckMy son's guitar ( Norman ST40) is separating 2-3 mm where the neck meets the body. I'm going to glue it up for him but am having time tryin… Started by Wayne Walker in Luthier Talk |
3 |
Feb 14, 2009 Reply by Donald A. Fortune |
Flat top or Radiused top?I know that a lot of builders these days use a radius on the guitar soundboard but some builders such as Olson, Ryan, Charis etc don't use… Started by gordon in Luthier Talk |
9 |
Feb 14, 2009 Reply by gordon |
© 2025 Created by Frank Ford.
Powered by
