Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
What is proper relief for an Irish Bouzouki?What would be the right relief for an Irish Bouzouki? I’ve got a Stephan Sobell for setup. The scale is 25 1/4”, and the relief at the 7th… Started by Bob Steinarsson in Luthier Talk |
1 |
Apr 17, 2017 Reply by Paul Breen |
original bridge thickness on older Santa Cruz Tony Rice model?I've been asked to do a neck reset on the above guitar. The serial # is 990, dating it to 1993(I think). I suspect the bridge may have be… Started by Dave Richard in Luthier Talk |
2 |
Apr 13, 2017 Reply by Dave Richard |
resetting a newer J-45Just curious if anyone here's had to reset a newer Gibson J-45. I did a '60s model some years back and it was a no-brainer, but I've never… Started by Chris Scott in Luthier Talk |
8 |
Apr 10, 2017 Reply by Robbie Collins |
an alternative to this stew mac product?I have no problem with purchasing this product from Stew Mac, but I don't want to pay the outrageous shipping associated with it: http://ww… Started by Jim Figurski in Luthier Talk |
13 |
Apr 10, 2017 Reply by Dave Hanna |
Freebie or Cheapie Tools and DevicesI am always on the lookout for a new or different tool or method, and the cheaper the better. Here are some items that I've found lately th… Started by Randall Curtis Bowman in Luthier Talk |
117 |
Apr 10, 2017 Reply by Roger Häggström |
Quick measurement question....If anyone here owns (or has access to) a Martin 'Backpacker' guitar, could you measure the length and widest-point-across for me? I'm tryi… Started by Mike Kolb in Luthier Talk |
0 | Apr 8, 2017 |
Too dry to rehumidify?We have an old Martin which came in split from waist to waist thru the endblock among other problems. It appears to have been stored in a s… Started by Bob Hensley in Luthier Talk |
3 |
Apr 7, 2017 Reply by Glen H |
P. Benson Parlor restorationHi All, New to the forum. I came across your board while doing some research on a P Benson Parlor guitar restoration I am tackling. Unfortu… Started by William Johanson in Luthier Talk |
15 |
Apr 5, 2017 Reply by Chris Vallillo |
Square hollow carbon rodsHere is a tip. One type of carbon rod that is readily available and rather cheap is 10 mm square tubes with an 8 mm hole. They are used for… Started by Roger Häggström in Luthier Talk |
2 |
Apr 4, 2017 Reply by Roger Häggström |
The "best" aquarium air pumpInstead of a ToneRite, I can recommend this aquarium "Marina 75" air pump. https://www.amazon.com/Marina-11112-75-Air-Pump/dp/B0048B1M1I/re… Started by Roger Häggström in Luthier Talk |
5 |
Apr 4, 2017 Reply by Roger Häggström |
© 2026 Created by Frank Ford.
Powered by
