FRETS.NET

William F.Eden's Discussions (620)

Search Forum

View

Discussions Replied To (601) Replies Latest Activity

"Jeff they are not very good pictures  the laquer was still wet  but it is a place fo…"

William F.Eden replied May 24, 2013 to Martin Mahogany Stain Recipe

 23 Jul 2, 2014
Reply by Ned Knepp

"Well this is what I come up with Jeff I hope this is some help to you.. Three drops…"

William F.Eden replied May 24, 2013 to Martin Mahogany Stain Recipe

 23 Jul 2, 2014
Reply by Ned Knepp

"Give me a bit of time and I will see if i can mix some to that color and get back to…"

William F.Eden replied May 24, 2013 to Martin Mahogany Stain Recipe

 23 Jul 2, 2014
Reply by Ned Knepp

"You need to mix the Mahogany with the Tobaco brown as your walnutuntil you get your…"

William F.Eden replied May 23, 2013 to Martin Mahogany Stain Recipe

 23 Jul 2, 2014
Reply by Ned Knepp

"I have done what Paul has said to do and it will work but I usely open it up a littl…"

William F.Eden replied May 21, 2013 to Guild m-20 - unusual neck reset question

 5 May 22, 2013
Reply by Steve Baker

"Well Paul I never realized he wanted to make that exact Taylor 812ce I guess my prob…"

William F.Eden replied May 9, 2013 to Guitar Kit for Single Cutaway Acoustic Electric?

 11 May 11, 2013
Reply by Robbie Collins

"Ckeck out this site Ipomoea acoustic guitars .I built one of these guitar's for a cu…"

William F.Eden replied May 9, 2013 to Guitar Kit for Single Cutaway Acoustic Electric?

 11 May 11, 2013
Reply by Robbie Collins

"I wounder if Frank is not talking obout the new color  water base Timber Mate filler…"

William F.Eden replied May 9, 2013 to Neck gluing left a small gap...how do I deal with this?

 9 May 9, 2013
Reply by William F.Eden

"Well John it must have taken a lot of nerve to have enterd into this question Bill..…"

William F.Eden replied Apr 24, 2013 to Humidity.....What did Stradivarius do?

 19 May 17, 2013
Reply by Peter Poyser

" I would go to www.lenewee lutherie on page six Hesh has a very good picture of the…"

William F.Eden replied Apr 19, 2013 to Side Bender Materials.

 7 Apr 20, 2013
Reply by Kevin cConlon

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service