FRETS.NET

Tom Krebs's Discussions (256)

Search Forum

View

Discussions Replied To (225) Replies Latest Activity

"Dan applies wax next to the fret. Then wicks in CA glue."

Tom Krebs replied Jun 1, 2009 to Paste Wax

 10 Jun 2, 2009
Reply by Christian Johnson

"Try this link http://acme-archtops.com/"

Tom Krebs replied May 29, 2009 to Reasonably priced arched top acoustic guitar kit

 7 Jun 7, 2009
Reply by Rob Mercure

"I would just scribe and use a small chisel and file. Safer than machines."

Tom Krebs replied May 19, 2009 to Method for cleanly cutting back fretboard.

 18 May 23, 2009
Reply by Mike Kolb

"This is not the 'Kelvinator'. That looks like this: http://www.frettedamericana.com…"

Tom Krebs replied May 19, 2009 to Kay Peghead logo. Is this a kelvinator logo?

 2 May 19, 2009
Reply by Tim Mace

"I would not use the spalted stuff. Possible spongy soft areas."

Tom Krebs replied May 12, 2009 to Bridge Plate Replacement Questions

 11 May 17, 2009
Reply by Nick Anthony

"I don't think they do either. That's a couple more pennies on the bottom line. I rec…"

Tom Krebs replied May 12, 2009 to Do Gibson Glue their Frets?

 4 May 13, 2009
Reply by Len Biglin

"I use the lamp and/or different sized hunks of 1/4" aluminum with a wooden handles s…"

Tom Krebs replied May 11, 2009 to BRIDGE REMOVAL AND RE GLUE

 8 May 13, 2009
Reply by FRANK

"Squeeze the two rear jaws opposite the clamping tip."

Tom Krebs replied May 8, 2009 to How to release cam clamp?

 3 May 8, 2009
Reply by Dan Coplan

"What do the strings 'break' on at the bridge? Simply the wood. Or is there a metal,…"

Tom Krebs replied May 4, 2009 to Cincinnatus Parlor lives again!

 6 May 5, 2009
Reply by Rick Homan

"Wow, I really like the look of that one! That tailpiece is very elegant. What is hap…"

Tom Krebs replied May 2, 2009 to Cincinnatus Parlor lives again!

 6 May 5, 2009
Reply by Rick Homan

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service