FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Sean, We use structural poltruded unidirectional carbon fibre rectangular sections f…"

Russell Vance replied Jul 20, 2010 to Sources for carbon-fiber neck re-inforcement?

 5 Jul 22, 2010
Reply by Russell Vance

"Hmmm, Rob, "solid body electric guitars are.. a slab of wood......the electronics an…"

Russell Vance replied Jul 18, 2010 to Poplar wood - curling direction

 14 Jul 18, 2010
Reply by Rob Mercure

"Yep, I know the history and understand the situation - but, once again we as luthier…"

Russell Vance replied Jul 15, 2010 to What to do with a Martin C-1?

 13 Jul 15, 2010
Reply by Russell Vance

"Hmmm, I note that USA NASCAR racing cars are highly modified to the extent that the…"

Russell Vance replied Jul 14, 2010 to What to do with a Martin C-1?

 13 Jul 15, 2010
Reply by Russell Vance

"Thanks Pierre, I need to think about this - I'll get back to you.R"

Russell Vance replied Jul 10, 2010 to Potentiometer Problem

 9 Jul 10, 2010
Reply by Russell Vance

"Pierre, I sort of get this if you have different pickup values (in parallel, both fu…"

Russell Vance replied Jul 8, 2010 to Potentiometer Problem

 9 Jul 10, 2010
Reply by Russell Vance

"Yep , Mac, it can be vexing but I just fired off the basics from my reference books…"

Russell Vance replied Jul 7, 2010 to Poplar wood - curling direction

 14 Jul 18, 2010
Reply by Rob Mercure

"Change the pickup hots to each of the pots (ie: swap them around) see if the problem…"

Russell Vance replied Jul 7, 2010 to Potentiometer Problem

 9 Jul 10, 2010
Reply by Russell Vance

"32 volt DC used to be the industry standard for safe DC operation - the current rang…"

Russell Vance replied Jul 6, 2010 to Ebony fretboard refret

 21 Jul 22, 2010
Reply by Howard Klepper

"Cupping is caused by poor drying/conditioning of the timber - it can go either way d…"

Russell Vance replied Jul 6, 2010 to Poplar wood - curling direction

 14 Jul 18, 2010
Reply by Rob Mercure

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service